screamin_mimi Posted July 7, 2011 Report Share Posted July 7, 2011 Need some opinions on fuel for my Banshee. Stock motor milled .030, 300 main jets, Duncan High Rev pipes I was running 93 Octane ... and was told that I should run 100 octane. However -- I can't buy 100 octane in my town -- only 110 octane. Can I mix half 93 & 110 to get the same effect? or -- what is your opinion on running 110? Thanks! Quote Link to comment Share on other sites More sharing options...
shakar Posted July 7, 2011 Report Share Posted July 7, 2011 i believe what fuel oct u use depends on compression and timing, my comp is 170 lbs with 20cc domes and + 4 timin ,im runnin 1/2 110 vp and 1/2 93 with good results Quote Link to comment Share on other sites More sharing options...
BUILDER Posted July 7, 2011 Report Share Posted July 7, 2011 You are fine on pump gas there is nothing to worry about. Yes you can mix 110 with pump and it works well but you have no need to do that unless you just want to run better gas Quote Link to comment Share on other sites More sharing options...
majorcr3 Posted July 7, 2011 Report Share Posted July 7, 2011 You are fine on pump gas there is nothing to worry about. Yes you can mix 110 with pump and it works well but you have no need to do that unless you just want to run better gas X2 Quote Link to comment Share on other sites More sharing options...
screamin_mimi Posted July 8, 2011 Author Report Share Posted July 8, 2011 X2 Thank you!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.