TheBigShabowski Posted March 22, 2011 Report Posted March 22, 2011 I almost have my banshee ready to kick. im running the wireing harness. got everything hooked up except for the ignition coil. does it matter where the 2 wires from harness go. do they fire simultaneously like a GM coil or is there a specific setup?. Thanx for any and all info. Quote
Larry's Shee Posted March 22, 2011 Report Posted March 22, 2011 I ran front wire to left just so they didn't have to cross/ maybe rub. Doesn't matter which cyl they go to. Quote
n2otoofast4u Posted March 22, 2011 Report Posted March 22, 2011 you talking about the spark plug wires themselves, or the orange and black wires that connect to the coil itself? Quote
TheBigShabowski Posted March 22, 2011 Author Report Posted March 22, 2011 you talking about the spark plug wires themselves, or the orange and black wires that connect to the coil itself? Im asking about the orange and balck wires from the harness. i didnt see any markings on the coil itself. Quote
knelson Posted March 23, 2011 Report Posted March 23, 2011 (edited) Im asking about the orange and balck wires from the harness. i didnt see any markings on the coil itself. Doesn't matter on the wires or the plugs wires....thats one nice thing about a waste spark ignition, it fires at the up and down stroke and the coil is exactly that a coil of wire that amplifies electricity. It doesn't care which pole is + or - Edited March 23, 2011 by knelson Quote
TheBigShabowski Posted March 23, 2011 Author Report Posted March 23, 2011 Doesn't matter on the wires or the plugs wires....thats one nice thing about a waste spark ignition, it fires at the up and down stroke and the coil is exactly that a coil of wire that amplifies electricity. It doesn't care which pole is + or - So it is a waste spark system sweet thanx. It will Start Today!!!!!!!!!!!!!!! Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.