dtr7720 Posted March 22, 2011 Report Share Posted March 22, 2011 so i jsut got my banshee motor rebuilt, and we started it, took it for a spin around the yard, then shut it off, then we started it again for another quick ride around the yard and the was a ticking coming from the stator, it sounds like a short? any ideas? Quote Link to comment Share on other sites More sharing options...
Ruko Posted March 22, 2011 Report Share Posted March 22, 2011 Did you adjust, or at least check the gap on the pick-up?? I put a new one on a few years ago and had a tick for a while.... turned out the magnet on the flywheel was hitting the pick-up. It still worked fine but it ended up cracking it before I found out what it was. Quote Link to comment Share on other sites More sharing options...
dtr7720 Posted March 22, 2011 Author Report Share Posted March 22, 2011 i beleive we did, im not sure though, i will go back and look, but my friend who rebuilt it thought that it might of had to much back pressure and its making the reeds slap Quote Link to comment Share on other sites More sharing options...
vifferman Posted July 16, 2011 Report Share Posted July 16, 2011 I know it's been a while but I'd like to know what the solution was, I have the same issue. Quote Link to comment Share on other sites More sharing options...
sinisterboo Posted July 16, 2011 Report Share Posted July 16, 2011 you can set the air-gap with a business card IIRC..... just make sure to check BOTH tabs, as someone could have jacked your flywheel up using incorrect puller..... Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted July 17, 2011 Report Share Posted July 17, 2011 Or did you rebuild the top and the rod bearing is gone,why did your top end go?Did you chew a piston?What clearance was it bored to? Quote Link to comment Share on other sites More sharing options...
vifferman Posted July 17, 2011 Report Share Posted July 17, 2011 Enquiring minds want to know... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.