banshee_kid350 Posted March 18, 2011 Report Share Posted March 18, 2011 1996 banshee, went riding one day and it was fine and the next time I get on to ride shee wont run. Preformed a spark test and found no spark. I have tested everything folllowing the manual . kill switch tests it is working properly key switch test good coil test off the bike I got, primary .5 ohms manual shows should be .28-.38 secondary 5800 ohms should be 4700-7100 (testing plug wire to plug wire) I have been reading a lot of the posts about coil testing and according to everyone elses testings they have been getting around the .5 ohms on the primary side. The only thing I am not sure of is when testing the secondary wire to wire I have to take the caps off in order to get my reading of the 5800 ohms, ohter wise it shows nothing. I test the caps by themselfs and cant get a reading. Can you test the caps by ohming them out or does it sound like the caps have a problem? Now the stator tests, Yelllow to black .05 (should be .026-.038) (Lighting coil resistance) white red to white green 117.2 (should be 94-140) (pick up coil resistance) green to red 18.4 (Should be 13.7-20.5) (charging coil resistance) Everything test good other than the yellow/black wire. Not sure what the lighting coil resistance means or if this is enough to cause a no spark. Any help would appreciated, im kinda stuck on what may be the real issue here as I have a couple of things pointing that they may be the problem. Thanks for the help. Quote Link to comment Share on other sites More sharing options...
banshee_kid350 Posted March 28, 2011 Author Report Share Posted March 28, 2011 I need to buy a flywheel puller so I can look at the stator I guess. Anyone know where I can buy a cheap puller from? Quote Link to comment Share on other sites More sharing options...
700vflash Posted March 28, 2011 Report Share Posted March 28, 2011 Just had a similar problem. I cleaned up all connections pertaining to ignition, fired right up after that. Quote Link to comment Share on other sites More sharing options...
acroadam Posted March 29, 2011 Report Share Posted March 29, 2011 I need to buy a flywheel puller so I can look at the stator I guess. Anyone know where I can buy a cheap puller from? Jeff@ f.a.s.t. has a fly wheel pulled..here's the number, 1-785-364-5325 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.