thewhitefirebird Posted February 24, 2011 Report Posted February 24, 2011 I'm rebuilding a 03 shee. And the motor was torn down when I got it and have a few questions now that I'm putting it back in. The hose that is right under the rear motor mounnwhat does it conect to? And what 2 hoses connect to the t fittng and the right side of the case right next to the cylnders? Quote
Snopczynski Posted February 24, 2011 Report Posted February 24, 2011 I'm rebuilding a 03 shee. And the motor was torn down when I got it and have a few questions now that I'm putting it back in. The hose that is right under the rear motor mounnwhat does it conect to? And what 2 hoses connect to the t fittng and the right side of the case right next to the cylnders? They all connect together and vent out on the steering hope area of the frame. Quote
midlifecrisis Posted February 24, 2011 Report Posted February 24, 2011 In case Snops answer doesnt explain enough, I had the same question. Case bolt # 16 has a vent tube right beside it. That vent tube is attached to the t, which also attaches to the tube which comes out from the clutch cover. Both of them are directed upwards towards the steering stem area, so that theyre up high, and wont allow oil to dump out when loading her up in a truck or wheelieing etc.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.