crankshaft

[jason108]

hello just wondering what is the best crank for a 0.20 over with NOSS head 20cc domes would be in the works of rebuilding and I got $500 to spend on a crank . any info would be great thanks

[crustydemon]

If thats all the mods that you plan on doing a good trued up stocker is fine. Otherwise I'd go hotrods.

[T_Shee]

for 500 you may be able to find a good used 4mil setup with jugs and domes. then you can sell your old jugs for some extra money. or if you wanna stick with stock stroke id say a hot rods like crusty said or one from m and m atv. that way you no it will be trued right and you can get good bearings on both sides for under 500

[jason108]

If thats all the mods that you plan on doing a good trued up stocker is fine. Otherwise I'd go hotrods.

 

 

I was thinking about gettin ga hot rods crank and sending it to herr juggs racing to get trued and welded

[T_Shee]

I was thinking about gettin ga hot rods crank and sending it to herr juggs racing to get trued and welded

 

 

good idea

[jbooker82]

Or just buy it from him so you dont have to pay shipping both ways over the road.

 

Jeff at fast has a good price on hod rods cranks too.

 

400 for a true and welded hot rods stock stroke crank.

450 for a trued and extra welded 4 mill crank.

http://www.farmandsandtoys.com/partdetail.asp?partid=78

[FASTOYS]

Thanks Jbooker !

We also have the 4mm Hot Rods for $430 that comes factrory trued/welded.

Rather than buying one and sending it in to be welded most of the HQ sponsors carry them on hand or should !

Maybe your stock crank can be trued/welded??