empathy Posted February 3, 2011 Report Posted February 3, 2011 Hi guys one of the carb slides is moving quite a bit before the other one when I push the throttle in. I still have the TORS above the carbs. How do I adjust the slides with the TORS? I'm assuming I'll loose quite alot of performance if I leave the carbs the way they are? Thanks Quote
tedd1 Posted February 3, 2011 Report Posted February 3, 2011 Look where your cables go into the TORS. There should be adjusters there. Quote
empathy Posted February 3, 2011 Author Report Posted February 3, 2011 Look where your cables go into the TORS. There should be adjusters there. Do you think it would effect performance because I have lost a LOT of top speed recently then noticed this, I was thinking reeds before this but I thought this could be a possibility. Thank you. Quote
bansheesrtoys Posted February 3, 2011 Report Posted February 3, 2011 it will make it run alot better. and better thottle reponse. jmo Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.