shee4speed Posted January 19, 2011 Report Posted January 19, 2011 (edited) so I been working on getting my jetting dialed in. I have HJR port,stock stroke,35 PWK's. I had this terrible bog off idle. So I turned the air screw in and it's a ton better. Now the screw is about .5 tuns out,from what I gather I need a smaller pilot jet. Is this right? Currently it has 152 mains, 48 pilot, CEL middle clip. The motor rips all the way to the top with just a tad of bog off idle. Suggestions please! Edited January 19, 2011 by shee4speed Quote
shee4speed Posted January 20, 2011 Author Report Posted January 20, 2011 Well so after doing some more rerading,it looks like I need 1 size larger on the pilot. Quote
Pasi S. Posted January 21, 2011 Report Posted January 21, 2011 I´m not an expert here and I don´t know Kevins work but I would go a smaller pilot, like 42 or so. I´m using 35.5PWK´s with my ported 64,5x54 stock cyl´s and I have 40 pilots and they are good. I would like to test 38´s but I don´t have them and I can´t get them over here. -Pasi S. Quote
shee4speed Posted January 21, 2011 Author Report Posted January 21, 2011 Damn,what elevation are you? Quote
shee4speed Posted January 22, 2011 Author Report Posted January 22, 2011 Okay, i just installed the 50 pilots and she is rippin great. No bogg at all. Thanks for all your help fellas. lol Quote
Pasi S. Posted January 22, 2011 Report Posted January 22, 2011 I´m at 300ft´s ASL. I´m sorry, I re-read your post and you were right, your pilots were too small if you have to turn the airscrew all in and it runs better that way. HEHEE!! Kevins port work offers alot more bottom end power than mine does! However, I have now a set of CEL needles and I´m going to use them after I´ll get my motor back together. We´ll see if I have to go bigger pilots then. My current needles are guite rich down low. -Pasi S. Quote
shee4speed Posted January 22, 2011 Author Report Posted January 22, 2011 I´m at 300ft´s ASL. I´m sorry, I re-read your post and you were right, your pilots were too small if you have to turn the airscrew all in and it runs better that way. HEHEE!! Kevins port work offers alot more bottom end power than mine does! However, I have now a set of CEL needles and I´m going to use them after I´ll get my motor back together. We´ll see if I have to go bigger pilots then. My current needles are guite rich down low. -Pasi S. What's the deal with the 35.5 size? Mine are 35. I'm at 1800 ft asl. Kevin does have some great work. Now I can go test it now that I'm jetted properly. Quote
Pasi S. Posted January 23, 2011 Report Posted January 23, 2011 I bought my carb´s that way (used). I don´t know why they are .5´s and honestly I don´t even care. They work for me so damn well. -Pasi S. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.