Mods to do to my new Banshee?

[Hooptiee]

I am by no means a expert but pipes and the rejet should get you a easy 7-9 hp , vforce reeds quicker throttle response and aprox 2-3hp and a adjustable timing plate 2hp. You can get a decent set of used pipes for $150 - $300 , VForce3 reeds for $175 - $220, Adj. timing plate $30 -$45, and a jet kit for $40 - $50. A set of pipes is a good starting point.

[Hooptiee]

This is a mod I did to my airbox I run a stock size K&N air filter with a wrap I only use the front section of my airbox cut the sides and the bottom off it uses the stock hangers that attach to the frame and I have never had it fall off unlike the individual K&N pods. A K&N will prob get you a couple hp

[BansheeMike350]

This is a mod I did to my airbox I run a stock size K&N air filter with a wrap I only use the front section of my airbox cut the sides and the bottom off it uses the stock hangers that attach to the frame and I have never had it fall off unlike the individual K&N pods. A K&N will prob get you a couple hp

Ok sweet bro. i found a set of used lrd pipes on ebay in rough shape for 185 plus shipping. No damage just rusty and dirty but i think i can get them looking nice. And is it worth getting the v-force reeds with the cage?Or are boysen reeds that go on the stock cage good enough? They are around 90$ for both sets and the v-force are a lot more.

thanks for the help I really appreciate it.