glamisaurus Posted December 28, 2010 Report Share Posted December 28, 2010 All parts are in good useable shape. Shipping extra. I have feedback somewhere on here, search my name. Pics are on glamisdunes.com under "Complete Banshee Partout" or I can e-mail them to you. Herr Jugs dune port cylinders bored once $300 Shearer inframes painted black with Pro Circuit spark arrestor silencers $300 (left side pipe rubbed on lower front motor mount bolt and has a dent in it) Chariot intake with stock reed cages and Boyeson reeds $80 33PWKs, K&N's, outerwares, cable, 150/155/160/165/170 mains, CEL/CGL/DEK needles, 45/52 pilots $300 Chrome +2 steering stem with big bar clamps $120 Stock axle with billet locknut $120 Elka rear shock with Elka Linkage setup for 190lb. rider $500 2 complete transmissions with forks, bearings and drum $120 each Modquad head with 21 and 22cc domes $140 IMS black 5.5 gal. tank with Pingel valve $120 Stock radiator/cap $40 Terry cable billet thumb throttle $40 AC nerf bars $100 2 rear brake masters with caliper(one has extended line) $40 each Front brake master $40 Stock flywheel $60 2 CDI boxes 1-95-96, 1-97-04 $80 each Stock head $20 2 stock headlight switches $20 each Quote Link to comment Share on other sites More sharing options...
glamisaurus Posted December 28, 2010 Author Report Share Posted December 28, 2010 (edited) double post Edited December 28, 2010 by glamisaurus Quote Link to comment Share on other sites More sharing options...
glamisaurus Posted December 28, 2010 Author Report Share Posted December 28, 2010 Also have Roll Design +2 arms/tie rods with triple rate Elkas C&R adjustable setup for around a 200lb. rider. I can put together a whole front end with spindles/hubs/brakes and brake line or sell separate. Price will vary. Located in So. Cal. Quote Link to comment Share on other sites More sharing options...
Firemann32 Posted December 28, 2010 Report Share Posted December 28, 2010 Pics of the Terry cable billet thumb throttle Quote Link to comment Share on other sites More sharing options...
hawke Posted December 28, 2010 Report Share Posted December 28, 2010 Can I get pics of the 5.5 gallon tank and inframes? Thx Quote Link to comment Share on other sites More sharing options...
glamisaurus Posted December 28, 2010 Author Report Share Posted December 28, 2010 Still trying to figure out getting pics resized Quote Link to comment Share on other sites More sharing options...
SuperMex Posted December 28, 2010 Report Share Posted December 28, 2010 Also have Roll Design +2 arms/tie rods with triple rate Elkas C&R adjustable setup for around a 200lb. rider. I can put together a whole front end with spindles/hubs/brakes and brake line or sell separate. Price will vary. Located in So. Cal. How much for the a arms tie rods and shocks? Pm me a price I'm in socal too Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted December 28, 2010 Report Share Posted December 28, 2010 I got dibs on the elka set up and 22cc domes, pending pics. Sent you a PM. Quote Link to comment Share on other sites More sharing options...
hawke Posted December 28, 2010 Report Share Posted December 28, 2010 Send pics to candjarnold@comcast.net thats the inframes, 5.5 tank and the nerf bars. Thx Quote Link to comment Share on other sites More sharing options...
glamisaurus Posted December 28, 2010 Author Report Share Posted December 28, 2010 Everyone that has requested pics, some things came up and I will not have them for you until thursday. Quote Link to comment Share on other sites More sharing options...
Badbar88 Posted December 28, 2010 Report Share Posted December 28, 2010 I'm on Orange County and would like to check out the carbs. PM me, let's work something out. Quote Link to comment Share on other sites More sharing options...
MN SHEE Posted December 29, 2010 Report Share Posted December 29, 2010 pics of tank to fast04banshee@yahoo.com and price with shipping to56310 Quote Link to comment Share on other sites More sharing options...
glamisaurus Posted December 29, 2010 Author Report Share Posted December 29, 2010 FYI - I do not take Paypal, Post Office money order only. Quote Link to comment Share on other sites More sharing options...
bbcmudtruck Posted December 29, 2010 Report Share Posted December 29, 2010 I'll get inline for the rear Elka and complete front end. Please send pics to bbcmudtruck@yahoo.com Quote Link to comment Share on other sites More sharing options...
boise_banshee Posted December 29, 2010 Report Share Posted December 29, 2010 FYI - I do not take Paypal, Post Office money order only. You got to be kidding Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.