glamisaurus Posted December 28, 2010 Report Posted December 28, 2010 All parts are in good useable shape. Shipping extra. I have feedback somewhere on here, search my name. Pics are on glamisdunes.com under "Complete Banshee Partout" or I can e-mail them to you. Herr Jugs dune port cylinders bored once $300 Shearer inframes painted black with Pro Circuit spark arrestor silencers $300 (left side pipe rubbed on lower front motor mount bolt and has a dent in it) Chariot intake with stock reed cages and Boyeson reeds $80 33PWKs, K&N's, outerwares, cable, 150/155/160/165/170 mains, CEL/CGL/DEK needles, 45/52 pilots $300 Chrome +2 steering stem with big bar clamps $120 Stock axle with billet locknut $120 Elka rear shock with Elka Linkage setup for 190lb. rider $500 2 complete transmissions with forks, bearings and drum $120 each Modquad head with 21 and 22cc domes $140 IMS black 5.5 gal. tank with Pingel valve $120 Stock radiator/cap $40 Terry cable billet thumb throttle $40 AC nerf bars $100 2 rear brake masters with caliper(one has extended line) $40 each Front brake master $40 Stock flywheel $60 2 CDI boxes 1-95-96, 1-97-04 $80 each Stock head $20 2 stock headlight switches $20 each Quote
glamisaurus Posted December 28, 2010 Author Report Posted December 28, 2010 (edited) double post Edited December 28, 2010 by glamisaurus Quote
glamisaurus Posted December 28, 2010 Author Report Posted December 28, 2010 Also have Roll Design +2 arms/tie rods with triple rate Elkas C&R adjustable setup for around a 200lb. rider. I can put together a whole front end with spindles/hubs/brakes and brake line or sell separate. Price will vary. Located in So. Cal. Quote
Firemann32 Posted December 28, 2010 Report Posted December 28, 2010 Pics of the Terry cable billet thumb throttle Quote
hawke Posted December 28, 2010 Report Posted December 28, 2010 Can I get pics of the 5.5 gallon tank and inframes? Thx Quote
glamisaurus Posted December 28, 2010 Author Report Posted December 28, 2010 Still trying to figure out getting pics resized Quote
SuperMex Posted December 28, 2010 Report Posted December 28, 2010 Also have Roll Design +2 arms/tie rods with triple rate Elkas C&R adjustable setup for around a 200lb. rider. I can put together a whole front end with spindles/hubs/brakes and brake line or sell separate. Price will vary. Located in So. Cal. How much for the a arms tie rods and shocks? Pm me a price I'm in socal too Quote
boise_banshee Posted December 28, 2010 Report Posted December 28, 2010 I got dibs on the elka set up and 22cc domes, pending pics. Sent you a PM. Quote
hawke Posted December 28, 2010 Report Posted December 28, 2010 Send pics to [email protected] thats the inframes, 5.5 tank and the nerf bars. Thx Quote
glamisaurus Posted December 28, 2010 Author Report Posted December 28, 2010 Everyone that has requested pics, some things came up and I will not have them for you until thursday. Quote
Badbar88 Posted December 28, 2010 Report Posted December 28, 2010 I'm on Orange County and would like to check out the carbs. PM me, let's work something out. Quote
MN SHEE Posted December 29, 2010 Report Posted December 29, 2010 pics of tank to [email protected] and price with shipping to56310 Quote
glamisaurus Posted December 29, 2010 Author Report Posted December 29, 2010 FYI - I do not take Paypal, Post Office money order only. Quote
bbcmudtruck Posted December 29, 2010 Report Posted December 29, 2010 I'll get inline for the rear Elka and complete front end. Please send pics to [email protected] Quote
boise_banshee Posted December 29, 2010 Report Posted December 29, 2010 FYI - I do not take Paypal, Post Office money order only. You got to be kidding Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.