ironmike Posted December 8, 2010 Report Posted December 8, 2010 does anyone know if a blaster axle will fit banshee trying to get tires closer to gether with out spending a bunch of money Quote
MN SHEE Posted December 8, 2010 Report Posted December 8, 2010 does anyone know if a blaster axle will fit banshee trying to get tires closer to gether with out spending a bunch of money put your hubs on backwards seen it on a few drag shees Quote
Larry's Shee Posted December 8, 2010 Report Posted December 8, 2010 Actually they do. On the blaster forum the cheap mod is a shee axle, 2" wider. Conversely the blaster axle is 2" narrower. Quote
trickedcarbine Posted December 9, 2010 Report Posted December 9, 2010 X2 on the YES! Not a bad idea for the drag guys. Additional inches can be had by flipping the hubs, but you will need some way to ream the studs out and insert them backward. No, I wouldn't use a big fuggin hammer. It would problably do some major mushrooming on the end of the threads. That set up should be plenty narrow and able to take any abuse up to a monster motor on asphault. Quote
sheefreak Posted December 9, 2010 Report Posted December 9, 2010 Yes it will work. I wanna say 03 and newer(Whatever year they went to disk brakes) are a complete no mod swap. Just use the shaft and use all your Banshee hubs. Maybe someone can verify the year for sure... Quote
tundish2800 Posted December 9, 2010 Report Posted December 9, 2010 ran one last year with no problems at all Quote
ONLY2STROKES Posted December 9, 2010 Report Posted December 9, 2010 i have a blaster axle i have been looking to trade for a shee axle if anyone is interested for their dragger. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.