stock crank banshee

[nphillybanshee]

What kind of HP should I expect from my banshee. Its in shop getting drag port done, 35mm keihin carbs timing plate v force reeds installed it has fmf power core 2's on it. And what is the most anyone on here knows about a stock crank banshee making HP wise.

[12 0 Clock P I M P]

ill go on a whim for a stock crank with a port job and bumped timing.........50????

 

My four mill drag port is around 75

 

so mayyyyybe you'll hit 50

[06specialedition]

If its good port work and you set the bike up right you should run 60-65. I'm running about 60-65 on my ported 350 with welded stock crank. But there could be a differance in HP running the fmf's, when I run Cpi's.

 

Now I've never had mine dynoed...so I'm not 100% sure, but its ran right next too shee's with 65HP and they've all had riders who weigh 40lbs less than me.. and I kept up no problem.

 

Who is building your bike? I would Ask them what kind of numbers to expect HP wise.

[Pasi S.]

My friend has a stock stroke, stock port, 66mm bore cylinders, coolhead 20cc domes, 34PJ´s, VF3´s, K&N´s and timing advance. Pipes are T5´s.

It made 51HP´s and 34.7 lb/ft of torque.

Here is the paper.

[Jereme6655]

how come the dyno chart shows it made 46 ft/lbs of torque?

[nphillybanshee]

Thanks for the input people. I will update with some dyno numbers and some videos as soon as it gets done.