Jump to content

2000 Banshee For Sale or Trade.


kpennepacker

Recommended Posts

Full frame up rebuild, Candy blue frame, and all stailess bolts along with everything freshly painted.

 

The motor.

392 big bore with Wiesco forged pistons and hot rod stock stroke crank

Dune ported cylinders

Vforce 3 reed cages and reeds.

Chariot racing billet intakes with built in crossover plate. Built to make the most power with the vforce 3s

A Pair of 34mm Mikuni flatside carbs with 240mains, .035pilots. with Uni pod filters

Modquad alum head and 21cc domes.

Nology hot wires ignition along with Nology plugs.

Dual pingel petcock and 3/8 fuel line.

CPI inframe drag pipe with silencers.

Alum radiator and CSI hoses

Alum water pump, stator and clutch covers.

Custom painted full bore front and rear fenders with custom grill

Custom checkered seat cover

909 bars and grips

PEP cluth Lever

Stainless steelgrab bar

Stainless steel tie rods

Itp T-9 polished alum wheel with New RzR 2 tires front and rear

Dura blue extended axle with hubs.

Stellar +4 extend chromolly swingarm with round house carrier with M&M 4 bearing all alum carrier with grease fitting.

Ek gold chain and new sprockets

Stainless front brake lines with double banjo

Stainless rear brake line with caliper parking block plate and new brake pads.

Yfz450 a-arms along with yfz shocks on the front

Every bearing on the quad has been replaced from the steering stem to wheel bearings

 

Awesome quad. Get compliments everywhere I take it. No disaapointments.

 

Looking for 3500 or full or partial trade on a 4 stroke quad or an older 250r depending on the value of the trade

 

Kevin2_171.jpg

 

Kevin2_170.jpg

Kevin2_169.jpg

Link to comment
Share on other sites

Full frame up rebuild, Candy blue frame, and all stailess bolts along with everything freshly painted.

 

The motor.

392 big bore with Wiesco forged pistons and hot rod stock stroke crank

Dune ported cylinders

Vforce 3 reed cages and reeds.

Chariot racing billet intakes with built in crossover plate. Built to make the most power with the vforce 3s

A Pair of 34mm Mikuni flatside carbs with 240mains, .035pilots. with Uni pod filters

Modquad alum head and 21cc domes.

Nology hot wires ignition along with Nology plugs.

Dual pingel petcock and 3/8 fuel line.

CPI inframe drag pipe with silencers.

Alum radiator and CSI hoses

Alum water pump, stator and clutch covers.

Custom painted full bore front and rear fenders with custom grill

Custom checkered seat cover

909 bars and grips

PEP cluth Lever

Stainless steelgrab bar

Stainless steel tie rods

Itp T-9 polished alum wheel with New RzR 2 tires front and rear

Dura blue extended axle with hubs.

Stellar +4 extend chromolly swingarm with round house carrier with M&M 4 bearing all alum carrier with grease fitting.

Ek gold chain and new sprockets

Stainless front brake lines with double banjo

Stainless rear brake line with caliper parking block plate and new brake pads.

Yfz450 a-arms along with yfz shocks on the front

Every bearing on the quad has been replaced from the steering stem to wheel bearings

 

Awesome quad. Get compliments everywhere I take it. No disaapointments.

 

Looking for 3500 or full or partial trade on a 4 stroke quad or an older 250r depending on the value of the trade

 

Kevin2_171.jpg

 

Kevin2_170.jpg

Kevin2_169.jpg

 

where r you located

Link to comment
Share on other sites

Ok I haven't got the right offer yet. I just put a brand new set of Keihin 33mm PWKs on and it really woke this thing up. This thing is ready to run, I have more pics. Great trail manners today and plenty of power. Must see and let the quad show itself.

 

I may be open to other trades Let me know whats up.

 

I am also looking to lift my jeep and need to put new tires on it so I will even take a partial trade of a 97-06 Jeep Wrangler lift or even a set of 35x12.50x15s or 33x12.50x15s

 

Thanks guys.

Link to comment
Share on other sites

Ok I haven't got the right offer yet. I just put a brand new set of Keihin 33mm PWKs on and it really woke this thing up. This thing is ready to run, I have more pics. Great trail manners today and plenty of power. Must see and let the quad show itself.

 

I may be open to other trades Let me know whats up.

 

I am also looking to lift my jeep and need to put new tires on it so I will even take a partial trade of a 97-06 Jeep Wrangler lift or even a set of 35x12.50x15s or 33x12.50x15s

 

Thanks guys.

Nice bike. If my son was 2 yrs older, Id buy it for him.
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...