vbanshee Posted October 23, 2010 Report Share Posted October 23, 2010 hey guys so im going to the desert tomorow and would like some help... i ran my bike today ran good besides coolant is comming out of the overflow too much of it. i have a billet water pump in it however my radiator isnt in the ebst conditiion the fins are about 70 percent bent i opened the raditator top and the coolant was white foam at the top im using engine ice. thanks fellas! Quote Link to comment Share on other sites More sharing options...
AKheathen Posted October 24, 2010 Report Share Posted October 24, 2010 start with a fin comb, and check/replace the radiator cap. fill it up with the cap off and start it. it should be flowing some, and maybe a couple bubbles on start-up, but they should go away and not be bubbling, or continually pushing coolant out. also, if the coolant rezivoir is hooked up back-wards, it will dump the coolant out and suck air in. Quote Link to comment Share on other sites More sharing options...
firebanshee Posted October 24, 2010 Report Share Posted October 24, 2010 You could put foam around the rad so it is in between the rad and the rad shroud, this forces the air to go through the rad instead of around it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.