Jetting setup?

[midlifecrisis]

OK, I know that there have been a million posts about jetting on here, but never one from me asking for advice, so here it is. I have an 01 banshee, that I bought blown up, and have rebuilt it. I was OK at first with a lot of stock stuff on the bike, but now I am adding some aftermarket items, for some more UMPHHH.

 

The bike always used to start first or second kick, until I installed a modquad intake. Now it takes 5-6 kicks, and it seems really sluggish on the bottom end, and wont idle at all?

 

Here are my specs

 

250 ' above sea level

2001 banshee

stock 26mm carbs

modquad billet intake

Pro Flow sponge style filter with outerware

no lid on the airbox

+ 4 timing

pro circuit platinum pipes

vitos crank, and rods

67mm wisecos

vitos hemi head w 20 cc domes

running BR8ES plugs

 

Presently running 300 jets, with the needle on the middle setting, and the compression was at 135lbs in both cylinders before the weekend.

 

Any thoughts?

[EvilBanshee]

Up your pilot jet 2 sizes. and play with your idol screws. See what happens.