Lockout Cover wont fit?

[SandShots]

heres a right side shot of my bike. got a chrome clutch case cover with RIS billet brake pedal and billet pegs. i am in the process of ordering a lockout cover and im not too sure if it will fit. look at how tight the cover and peg area is.

 

 

[shanYE west]

have you tried adjusting the lever down a bit until it clears?

[Phelps]

i have the same pegs, pedal and i had to drop the pedal down and shave it. i almost have 0 pedal and the rear brakes barely work

 

 

click the pic

[sheefreak]

I had to space out my footpegs and custom bend the brake lever to fit when I had my stock frame.

[Phelps]

also i has to shave my peg on the corner

[SandShots]

i have the same pegs, pedal and i had to drop the pedal down and shave it. i almost have 0 pedal and the rear brakes barely work

 

 

click the pic

 

 

but your lockout cleared it right?

did your brakes not work because of the adjustment on the pedal or because u couldnt reach the pedal while riding?

[Phelps]

because of how far i had to drop the pedal... barely has any movement befor the pedal hits the frame.

[jbooker82]

Direct Drive lockup new cast cover.

[bbcmudtruck]

I had to bend my brake lever out and up quite a bit to get it to fit. I'm running a stock steel brake lever though, it was easy to bend into shape.

[Phelps]

I had to bend my brake lever out and up quite a bit to get it to fit. I'm running a stock steel brake lever though, it was easy to bend into shape.

yeah the aluminum pedals are not so easy. not to mention bulky. i am almost thinking about bending a stock one and sending it off for chrome.

[alf44]

All you have to do is put a couple washers behind the footpeg. Before I got new DD pegs I think I had one washer in the rear and 2 in the front bolt. I did the same thing with my DD lockout to jbooker. A couple chrome washers.

[McBanshee]

I have a Direct Drive lockout cover, RIS Foot Pegs and factory brake lever. All I had to do was adjust the brake lever down a little bit.

 

[crazycanuck]

All you have to do is put a couple washers behind the footpeg. Before I got new DD pegs I think I had one washer in the rear and 2 in the front bolt. I did the same thing with my DD lockout to jbooker. A couple chrome washers.

 

 

what Alf said..... I also shaved some material off the peg itself

[SandShots]

All you have to do is put a couple washers behind the footpeg. Before I got new DD pegs I think I had one washer in the rear and 2 in the front bolt. I did the same thing with my DD lockout to jbooker. A couple chrome washers.

 

 

i thought of that too but i have a custome welded bracket from the peg to the oof pipes.

[wacko2000]

I have a Direct Drive lockout cover, RIS Foot Pegs and factory brake lever. All I had to do was adjust the brake lever down a little bit.

 

 

 

Im usually not a Fan of blue banshee's, But you have some serious detail in your bike.

One of the nicest blue banshees that i have seen, Real clean bike dude.