T5 Can they use stock springs ? or not

[dirtbike drew]

I have the T5 and I don't have the springs can I get the stock ones for them or do I need to contact toomey and get there springs ? And on my silencers do they need brackets or do I just bolt them to the quad like that ??? Thanks

 

Drew

[Infamous039]

Stock springs will work just fine. For the silencers you will need the exhaust hangers for the rear.

 

 

I have the T5 and I don't have the springs can I get the stock ones for them or do I need to contact toomey and get there springs ? And on my silencers do they need brackets or do I just bolt them to the quad like that ??? Thanks

 

Drew

[SAVAGE420]

OEM exhaust springs are the only;y type i will ever run.

 

They cost a lil more then the shitty after market ones, but are Much better and last a long time and don't fall off out of the blue.

 

My opinion anyways.

[dirtbike drew]

Ok thanks guys I didn't know if oem spring

was the same length and aftermarket ones for the pipes.. Thanks again ..

 

Drew

[bansheesandrider]

Most, if not all aftermarket pipes use the stock size springs. Toomey silencers are meant to have a hanger that looks like a miniature version of the front pipe hanger and the only place I know to get them is Toomey. I am not sure, but I think Modquad make some for Toomey silencers but they don't have the rubber flex joint, they are solid alum.

[fastquad02blaster]

Most, if not all aftermarket pipes use the stock size springs. Toomey silencers are meant to have a hanger that looks like a miniature version of the front pipe hanger and the only place I know to get them is Toomey. I am not sure, but I think Modquad make some for Toomey silencers but they don't have the rubber flex joint, they are solid alum.

The ones on my bike are just solid and I haven't noticed a problem with them thus far. They've been on for 3 or 4 years now.