Carbs leak out of the overflow

[hillshooter421]

I have a 10mm cheetah with 39's and when i hit the throttle and it revs back down i get some fuel that comes out of the overflow. Has anyone had this happen and how is it fixed. Do you think it may be the fuel level to high or is it from the vibration when its reving down?

[Bruce_Blaine]

I don't know much about it, but I had the same problem and someone told me my float was sticking. Just a thought.

[mailman]

It is normal. Don't worry about it. The motor shaking back and forth on a banshee causes this. Your motor vibration is worse with the "big cheetah" also. Since the carbs are not centered on the motor, (due to the fact that there are 2), amplifies this effect. If your motor only had one carb then it would be centered and would not shake as bad.

 

I hope that makes sense.

 

 

Mailman

Edited April 20, 2010 by mailman

[hillshooter421]

It is normal. Don't worry about it. The motor shaking back and forth on a banshee causes this. Your motor vibration is worse with the "big cheetah" also. Since the carbs are not centered on the motor, (due to the fact that there are 2), amplifies this effect. If your motor only had one carb then it would be centered and would not shake as bad.

 

I hope that makes sense.

 

 

Mailman

Is there any way to correct it?