no spark on my banshe

[banshee96er]

hey guys im new here but ive been lookin around alot,so the other day i rode my banshee all day,then i parked it in my shed,i went out yesterday and it wouldnt start,changed the plug still woulnd,now it has no spark,oh and when i kick it with the light switch on usually they glow when i kick it over there not,im guessing a stator or cdi but im not sure,any help please

[banshee96er]

hey guys im new here but ive been lookin around alot,so the other day i rode my banshee all day,then i parked it in my shed,i went out yesterday and it wouldnt start,changed the plug still woulnd,now it has no spark,oh and when i kick it with the light switch on usually they glow when i kick it over there not,im guessing a stator or cdi but im not sure,any help please

 

you guys can proabably tell me what it is in a minute

[banshee_terror_]

idk but my stator just whent.. my problem is it sparks once or twice... then wont spark for like 3 kicks then sparks again. then wont spark for like another 3 kicks and it keeps happining over and over again.. but your problem might be a stator problem..

[Smokestack]

I have the same issue but i tore mine down for a winter project. Just putting it back together again now. Installed a timing plate and when tryin to take the flywheel off i inserted a screw driver into one of the holes in the flywheel So i bent one of the white things on the lower half of the stator.... So needless to say i think that is my issue.

[banshee96er]

I have the same issue but i tore mine down for a winter project. Just putting it back together again now. Installed a timing plate and when tryin to take the flywheel off i inserted a screw driver into one of the holes in the flywheel So i bent one of the white things on the lower half of the stator.... So needless to say i think that is my issue.

idk but i hope its an easy fix

[Larry's Shee]

Check your wireing, remove flwheel if you have to. Check for lose plugs, broken wires. Check pick-up coil gap to flywheel. Check switches, check ground for coil and CDI , MUST be clean bare metal. This a no cost diagnosis, except flwheel puller (a must). Check for rust on flywheel and stator poles.

[Larry's Shee]

Also check that flywheel is tight and key is good.

[banshee96er]

Also check that flywheel is tight and key is good.

ok,so i havent tryed bump starting it in a few days ,i tried it today and all the lights came on,does that mean the stator is ok and its a coil

[rdzbangshee]

ok,so i havent tryed bump starting it in a few days ,i tried it today and all the lights came on,does that mean the stator is ok and its a coil

the ignition coils on the stator are shorted out . your lighting coils are fine . do a ohm test or get it rewound for cheap . my bro jams screwdrivers in his and bust it all up every time .