What Carbs?

[HardLuck]

The guy I bought my bike from didn't what size/brand yada yada the carbs were.....I know their Mikuni but dont know what size or what they came from....Any of you Guru's on here know what they are with-out tearin em out? here's a few pic's of them and the ghetto choke?

 

 

 

 

 

 

Any help will be greatly appreciated......Thanks!

[Building my First]

Hard to tell just by looking. Judging by the choke cables they are old snowmobile carbs, the most common size for the old Mikuni VM is 34mm. Those do look like stock boots, your going to have to take them off and measure.

[HardLuck]

Hard to tell just by looking. Judging by the choke cables they are old snowmobile carbs, the most common size for the old Mikuni VM is 34mm. Those do look like stock boots, your going to have to take them off and measure.

 

Okay where do I measure at?

[Building my First]

Measure inside diameter of engine/intake side of carbs.

[HardLuck]

Measure inside diameter of engine/intake side of carbs.

 

Okay thanks! Yeah I had a friend mention he thought they were possibly snowmobile carbs but I didn't believe him......

[HardLuck]

So I measured them today and they were 1.25" that is 31.75mm converted into mm....So does that make them These: CLICK ??? They look very similar.

 

Are these Mikuni VM carbs good or bad?

[Building my First]

They are the same as stock carbs just bigger. Stock is a 26mm VM. You would have crisper throttle response with flat slide carbs but VM's are ok.

[RadarRacing]

Look like polaris snomo carbs by that choke lever. I would guess 34mm as well but u measured them close to 32mm so maybe they are 32s?