beebs Posted March 20, 2010 Report Share Posted March 20, 2010 The breather hose that comes from the clutch cover goes up and connects to a tee fitting. From there it goes up by the handle bar's loops around and rest's there for the vent. Now if you go back to the tee and follow it the other way down to the back of the motor, can someone tell me where that end connect's to. Can't seem to find the hookup. Tks. Quote Link to comment Share on other sites More sharing options...
dirtydownunder Posted March 20, 2010 Report Share Posted March 20, 2010 like you said one end is a vent near the bars, the other is near the water pump and the other is to the back of the motor under the rear engine mount. Quote Link to comment Share on other sites More sharing options...
00sheerzr Posted March 20, 2010 Report Share Posted March 20, 2010 ya its alittle hard to see but youll find it and its a pain to get in Quote Link to comment Share on other sites More sharing options...
beebs Posted March 20, 2010 Author Report Share Posted March 20, 2010 Thank's guys. Just putting a fresh 4 mill in and that stumped me because the last owner must not have known that and just run a seperate vent line from the back of the motor down behind the motor. The one off the other end of the tee was run nowhere. Quote Link to comment Share on other sites More sharing options...
White97Banshee Posted March 20, 2010 Report Share Posted March 20, 2010 My rear vent came out once when I had my bike on the grab bar washing the underside so it spilled all the tranny oil everywhere lol. It's such a pain to get the thing back in because there is no way to get a good grip on it to force it down in there cuz of the motor mount. Quote Link to comment Share on other sites More sharing options...
SD1026 Posted March 21, 2010 Report Share Posted March 21, 2010 Yea happen to me once. Took me half hour to get it. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.