sheldonoga Posted March 1, 2010 Report Share Posted March 1, 2010 i have a banshee thats bored to 65.50 wiseco pistons collhead with 17cc domes toomey t5 +4 timming stock carbs with 280 main jets vforse3 reed vavles.the crank is stock im gona run it on 110 do you guys think it will work or do i need 20cc domes? thanks Quote Link to comment Share on other sites More sharing options...
BSHEE400 Posted March 1, 2010 Report Share Posted March 1, 2010 i think 110 should do just fine, what's your compression? Quote Link to comment Share on other sites More sharing options...
So Cal Suspension Posted March 1, 2010 Report Share Posted March 1, 2010 Someone will probably correct me, but depending on your elevation, I think 280's might be a little lean...? Quote Link to comment Share on other sites More sharing options...
sheldonoga Posted March 1, 2010 Author Report Share Posted March 1, 2010 i think 110 should do just fine, what's your compression? i didnt put it on i was making sure it would work first.thanks Quote Link to comment Share on other sites More sharing options...
sheldonoga Posted March 1, 2010 Author Report Share Posted March 1, 2010 Someone will probably correct me, but depending on your elevation, I think 280's might be a little lean...? not sure on the elevation i live in va. Quote Link to comment Share on other sites More sharing options...
firebanshee Posted March 2, 2010 Report Share Posted March 2, 2010 i have a banshee thats bored to 65.50 wiseco pistons collhead with 17cc domes toomey t5 +4 timming stock carbs with 280 main jets vforse3 reed vavles.the crank is stock im gona run it on 110 do you guys think it will work or do i need 20cc domes? thanks If you put your compression too high you will lose alot of overrev on your motor, you will gain alot of torque, i think you would want around 180 compression. Maybe a 19cc dome. Quote Link to comment Share on other sites More sharing options...
firebanshee Posted March 2, 2010 Report Share Posted March 2, 2010 What kind of air filters are you running? Quote Link to comment Share on other sites More sharing options...
sheldonoga Posted March 3, 2010 Author Report Share Posted March 3, 2010 What kind of air filters are you running? so 19cc domes.i have k&n filter with the lid off.thanks for the help Quote Link to comment Share on other sites More sharing options...
firebanshee Posted March 3, 2010 Report Share Posted March 3, 2010 I see that you said your crank is stock, is it welded? it should be if not. 280 might be a little lean, i would def do a plug check. Might need a 290 or 300. If it runs good and plug looks good then your good Quote Link to comment Share on other sites More sharing options...
bansheesandrider Posted March 3, 2010 Report Share Posted March 3, 2010 WE really need to know your elevation, it will affect both your jetting and what domes you should run. You can go on Google Earth, I think, and find your elevation.If you are at higher elevations, your jetting will be leaner and your domes should be smaller than if you are at lower elevation. High elevation has less oxygen in the air so you need less fuel also, and there is less atmosheric pressure at high elevations so the cylinders don't fill as well and therfore you need to squeeze it harder. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.