help with jetting

[95 shee]

hi i was wondering if someone could help me out with jetting i just got my bike back together i went from stock to pipes ported jugs just an exaust port removed the snorkel and i am 60 over weseco pistons i am at 430 elevation can anyone help me out it is in the 40's temp also and should i loose the lid or drill holes would that help with more power?

[locogato11283]

pilot will be 27.5. id prolly start with a 320 main and work down from there. needle in the middle and air screws .5 to 2 turns out depending on throttle response. if you dont ride in the water i say drill some holes or lose the lid totally.

[GrMeyer]

If u run the lid. I would start with around a 280 main unless u add holes. If u add holes the depending on how big and how many I would start around 300. No lid I would start with around 320 like loco said. Deff need to move to 27.5 pilots. There is a web site I post all the time on here. Read up on that. It will help u understand what's going on better. I would post it but I'm on my cell. Any probs just post back.