glamisshee Posted March 2, 2010 Report Share Posted March 2, 2010 Dibs on the water pump cover if it is still available.. Let me know.. Quote Link to comment Share on other sites More sharing options...
bc banshee Posted March 2, 2010 Report Share Posted March 2, 2010 Ok so I decided to part out my motor. All prices are PLUS shipping! If you want to use paypal you pay the 3% for fees, no if ands or buts. If not I will accept money orders or personal checks but parts will not ship until money clears. That goes for paypal as well. So if you use the bank account option, it can take up to a week for it to clear so keep that in mind. Please remember all parts are slightly used. They may have small scratches, or slight surface rust. As everyone that knows me can attest, I am super anal about maintaining my gear, but the bike has been sitting for over a year while I was deployed so the humidity has caused some spots on a few metal parts. Nothing that can’t be cleaned off. I just don’t want to hear anyone crying that it wasn’t fresh from a chrome. I am sure that there are things I forgot to list. If you need something that is not here send me a pm and see if I have it. I will not separate the clutch so don’t ask. This is only for the motor. Do not ask about parts off the bike as I am not parting it as of this second. That will come later if I can not sell it as a roller. Polished K&T Drag Ported Cub and Blaster Pistons 1000 Blue Chariot Head w/ alky domes (I think they are 18cc) 125 Hotrods 4mil Longrod Crank w/ maxload 350 WCR Duneable 1-5 Neut Down override. Comes with modded shift drum (bearing attached to the end) 300 D&D Lockup and Cover 275 Full Hinson 8 plate Billet clutch. The pressure plate has a little ring on it where it rubbed the nipples inside of a stock cover but it is 100% ok to run 400 RS 200w Stator 100 Cascade Billet stator cover 175 Cascade Billet pump cover 25 Nology Coil w/Hotwires 125 DynaTek CDI 175 VF3 Reeds 150 Boss Billet Intake (38-41mm) 100 41mm Packard Lectrons w/ Billet Bowls 500 Shear OOF Drag Pipes (Same Side Left) 425 Packard Pancake 25 Modquad Billet Water Pump 30 Quote Link to comment Share on other sites More sharing options...
bc banshee Posted March 2, 2010 Report Share Posted March 2, 2010 Ok so I decided to part out my motor. All prices are PLUS shipping! If you want to use paypal you pay the 3% for fees, no if ands or buts. If not I will accept money orders or personal checks but parts will not ship until money clears. That goes for paypal as well. So if you use the bank account option, it can take up to a week for it to clear so keep that in mind. Please remember all parts are slightly used. They may have small scratches, or slight surface rust. As everyone that knows me can attest, I am super anal about maintaining my gear, but the bike has been sitting for over a year while I was deployed so the humidity has caused some spots on a few metal parts. Nothing that can’t be cleaned off. I just don’t want to hear anyone crying that it wasn’t fresh from a chrome. I am sure that there are things I forgot to list. If you need something that is not here send me a pm and see if I have it. I will not separate the clutch so don’t ask. This is only for the motor. Do not ask about parts off the bike as I am not parting it as of this second. That will come later if I can not sell it as a roller. Polished K&T Drag Ported Cub and Blaster Pistons 1000 Blue Chariot Head w/ alky domes (I think they are 18cc) 125 Hotrods 4mil Longrod Crank w/ maxload 350 WCR Duneable 1-5 Neut Down override. Comes with modded shift drum (bearing attached to the end) 300 D&D Lockup and Cover 275 Full Hinson 8 plate Billet clutch. The pressure plate has a little ring on it where it rubbed the nipples inside of a stock cover but it is 100% ok to run 400 RS 200w Stator 100 Cascade Billet stator cover 175 Cascade Billet pump cover 25 Nology Coil w/Hotwires 125 DynaTek CDI 175 VF3 Reeds 150 Boss Billet Intake (38-41mm) 100 41mm Packard Lectrons w/ Billet Bowls 500 Shear OOF Drag Pipes (Same Side Left) 425 Packard Pancake 25 Modquad Billet Water Pump 30 Quote Link to comment Share on other sites More sharing options...
bc banshee Posted March 2, 2010 Report Share Posted March 2, 2010 I would be interested in the clutch,and the dyna ignition.Just need to know the year of the cdi.Is the clutch basket alloy or steel?Thanks john call 250 642 3057,and we can arrange payment. Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 (edited) Water Pump Cover , Case Saver, and Dipstick SOLD! bc banshee: The whole clucth is billet. Basket, inner hub, and pressure plate. Oh and the cdi is form a 2000 so it is the newest plug style. Edited March 2, 2010 by Bansh-eman Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 Nology SOLD pending payment Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 Chrome Kicker SOLD pending payment Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 (edited) Hinson 8 Plate and Nology is SOLD!!! Edited March 2, 2010 by Bansh-eman Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 Crank and Lockup w/ cover SOLD!!! Quote Link to comment Share on other sites More sharing options...
LostcauseZ06 Posted March 2, 2010 Report Share Posted March 2, 2010 Thanks for the crank/lockup. great deal and great communication so far with this seller! Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted March 2, 2010 Report Share Posted March 2, 2010 whats left Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 whats left Give me a little time and I am going to type out a new list of everything that is left, plus some of the stuff I didn't put on the first list. Remember this is just the motor and other smaller items. I still have the whole roller. If I can not sell it, then I will part it out in the near future. Quote Link to comment Share on other sites More sharing options...
sleeper06 Posted March 2, 2010 Report Share Posted March 2, 2010 Did the pipes sell also the cdi has the shift kill option on it rite,if it didnt sell let me know Quote Link to comment Share on other sites More sharing options...
Bansh-eman Posted March 2, 2010 Author Report Share Posted March 2, 2010 OK. So here are the parts that I still have. Keep in mind this does not include the parts off the roller, as I am trying to sell it first and if I can't then I will part it at a later date. As before all prices are PLUS shipping, and if you want to use paypal add 3% for fees. Polished 421 cub Drag Ported by K&T and Blaster Pistons - 1000 (Sold pending money order) Blue Chariot Head w/ alky domes (I think they are 18cc) - 125 (Sold Pending money order) RS 200w Stator - 100 I also have a Billet Timing plate I will sell for an additional 20 Cascade Billet stator cover - 175 Nology Coil w/Hotwires - 125 (Sold pending money order) Boss Billet Intake (38-41mm) - 100 41mm Pumper Packard Lectrons HV's w/ Billet Bowls - 500 Shearer OOF Drag Pipes SB no silencers (Same Side Left) (Sold pending money order) Stock Flywheel - 75 Nology custom braket - 20 Allows your Nology coil to hang in stock location Kicker gear with spring - 25 65l per hour Black Mikuni fuel pump - 25 Have a mount to bolt it unde your tank for 10 Ported for 421 cub case halfs, Powder coating has seen better days - 175 Stock coil (I got this off ebay 2 years ago and never used it, I don't know if it is good or not but I was told it was) - 20 Stock CDI from a 2000(I got this off ebay 2 years ago and never used it, I don't know if it is good or not but I was told it was) - 50 Nylon A Arm Bushings - 10 Clymers - 15 Flywheel puller - 10 Chain braker tool - 20 Spring puller tool - 5 Used clucth cable - 20 Used Throttle Cable TORs removed - 20 PODS w/ Outterwares (small holes from rubbing in outter wares) - 30 Regina Gold Non ORing Chain fits +12 - 100 Chrome Rear Brake Lever - 30 Quote Link to comment Share on other sites More sharing options...
Boner Posted March 2, 2010 Report Share Posted March 2, 2010 I want the timing plate and cylmers. Lol Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.