Jump to content

Recommended Posts

Posted

Alright guys I need some help. I have recently pulled the bikes out of the garage to start to get them into condition to use this year. I put them away running in perfect condition and now one of them has absolutely no spark. I have spent about 15 total hours on the bike in the past two days reading forums and the manual. Have tested every connection atleast twice and cleaned all connections. The stator was replaced about a year and a half ago and has only 5 rides on it and the spark plug coil and unit itself was replaced at the same time. I have checked the gap in the pick up coil, which is fine, and have replaced the spark plugs with new ones. I have also checked all grounds. The TORS unit is removed. If anyone can think of anything else to check other than what I already have then please give me a shout, as I am fresh out of ideas. Thanks!

Posted

Alright guys I need some help. I have recently pulled the bikes out of the garage to start to get them into condition to use this year. I put them away running in perfect condition and now one of them has absolutely no spark. I have spent about 15 total hours on the bike in the past two days reading forums and the manual. Have tested every connection atleast twice and cleaned all connections. The stator was replaced about a year and a half ago and has only 5 rides on it and the spark plug coil and unit itself was replaced at the same time. I have checked the gap in the pick up coil, which is fine, and have replaced the spark plugs with new ones. I have also checked all grounds. The TORS unit is removed. If anyone can think of anything else to check other than what I already have then please give me a shout, as I am fresh out of ideas. Thanks!

Swap parts off the other bike that has spark, cdi maybe. Does the flywheel sound like a baby rattle (broken magnets}?.pickup coil itself. :shrugani:

Posted

Are you posotive the e.s.s. is not connected?

Posted

not the main keyed switch, if it ohm then its ok. check your stator to ground

Posted

Swap parts off the other bike that has spark, cdi maybe. Does the flywheel sound like a baby rattle (broken magnets}?.pickup coil itself. :shrugani:

No the flywheel doesn't sound like a baby rattle so that is ruled out I am just out of thoughts about what to do.

Posted

Man. I did that numerous times including again today and still shows that there is resistance on the ohm meter to the specified current in the manual. I even took the entire harness out of the frame today and checked any wires for wear and tear and checked the connections once again. Any other steps I can take now?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...