clutch issues

[Sandking]

Is it a sign of a slipping/failing clutch when taking off from a stop at wot it will only catch if the clutch is released slowly. When I try to race and pop the clutch it boggs. Once I get going it works fine. The trans oil is fine, I'm running a trinity clutch, and I only ride in Glamis.

[bansheeseat$$]

If it is boging it is not a slipping clutch,Sounds like gearing/jetting issue

[Sandking]

If it is boging it is not a slipping clutch,Sounds like gearing/jetting issue

[locogato11283]

is the motor just falling on its face due to too high of gearing and not enough power? what is your gearing, swingarm length, tires, rider weight and mods to the motor?

[Sandking]

Go figure tried jetting pilots,needle, and mains. Also tried on flat and down hill take offs same results.

[Sandking]

Im running 14, 41 sprockets stock. 8 paddle haulers on the rear with a plus 4 swingarm. I have trinity stage 3 porting, toomey t5s, v-3s, dual 35s (i know too big may be my problem) Any thoughts? When taking off it does seam to fall on its face.

Edited February 16, 2010 by Sandking

[bansheeseat$$]

I think you answered your own question about the carbs. Go to a 13/42 sprocket set up and that should really help you out,However a set of 28's or 30mm carbs would be the fix for the bogging.

[Sandking]

Thanks for the reply I may just go back to the single 35 until I get the 4 mill from hjr or fast.

[locogato11283]

i think your gearing is just too high. drop a tooth in the front.