Stroker !

[redsleeper01]

hey guys i have had my banshee for a good period of time already and i am m think of building a 5 mil stroker but i don not what stroker to go for a twister, or hotrod any opinions thanks.

[bholmes]

Depends on how much money you have and what you want to do. If you stick with a 4mil you don't have to clearance the crank case or anything, which is nice.

[redsleeper01]

Depends on how much money you have and what you want to do. If you stick with a 4mil you don't have to clearance the crank case or anything, which is nice.

like 3000

[captainhowdie]

Depends on what kind of riding you do, but for $3000 you could build a 4mill cub which is a great bang for your buck.

[locogato11283]

yea, we need to know what kind of riding you do before we can recommend anything. for $3,000 though, you can have a badass motor and do it right the first time.

[bholmes]

+1 for the 4mil cub, a good set of pipes and carbs and some velcro to hold you to the seat!

 

http://www.trinityracing.com/prod_cheetahcub.html

Edited February 11, 2010 by bholmes

[FASTOYS]

I would check with the HQ Sponsors as i think you will prolly get a better deal from any of us !!!

I believe your confused with 5mm long rod vs 4mm Stroke crank. They come 4mm stroke with 5mm longer rod (115mm HOT RODS) or 4 mm stroke with 110mm rod short rod ( Vitos).