mosewell Posted February 5, 2010 Report Posted February 5, 2010 ok i'm new to all this and i just bought a 01 Banshee my first one its stock as far as i know besides the DG tips and an K&N airfilter was on there when i got it.. it didnt have any spark and the guy said it wasnt gettin any gass to the head he said it needed to be rejetted. so i bought it and i fooled around with it and got it running without new jets and the spark problem was the cdi. i got it all done she was running good then it started gettin cold out. now i cant do anything with her. shes fooling plugs and hard to start not running right. i dont have a clue what this could be.. i'v read things on here where ppl have rejetted for the winter but they have alot of mods one there bike so it wouldnt be the same as mine... anyone know what this could be. any help would be grate! Thanks Quote
98_shee Posted February 5, 2010 Report Posted February 5, 2010 Yes you need to rejet for colder weather. What is your current jetting? Quote
ECshee Posted February 5, 2010 Report Posted February 5, 2010 im in the same position. i have toomey t5's and k&n pods. slight port job, and run 300's for weather over 50*...and sometimes i think it could still be jetted more efficiently. its about 25*-40* right now, and i dont ride it, not too sure if it should be jetted again for weather this cold and dont have extra jets. Quote
FrankieSquid Posted February 5, 2010 Report Posted February 5, 2010 For colder weather you have to richen it a tad bit depending where your jetted at now. I live in az so i have mine jetted for 75f and up. When i rode it in 50f weather it was running a bit lean so jetting it to a richer jetting should solve your issue. Quote
MN SHEE Posted February 5, 2010 Report Posted February 5, 2010 I was told for every 20-30 degrees colder go one size bigger on gets and tunr the air fuel mixtre out just a bit to if needed. I live in mn and try to take my shee out when it gets above 30 out. Quote
jmoore Posted February 6, 2010 Report Posted February 6, 2010 I was told for every 20-30 degrees colder go one size bigger on gets and tunr the air fuel mixtre out just a bit to if needed. I live in mn and try to take my shee out when it gets above 30 out. Where abouts in MN? I could use another fellow banshee rider dont ya know! Quote
MN SHEE Posted February 6, 2010 Report Posted February 6, 2010 Where abouts in MN? I could use another fellow banshee rider dont ya know! Hell yea man, I got two other buds that ride shees. We are west of St. Cloud Quote
GrMeyer Posted February 7, 2010 Report Posted February 7, 2010 What jets are in the bike now? here is a great site to read up on for jetting http://www.dfn.com/benkaren/jetfaq.html Quote
Larry's Shee Posted February 9, 2010 Report Posted February 9, 2010 X-2 on cold weather rejetting. Also your oil could be settleing out of your gas mix, shake your 'shee back& forth to mix fuel. Bean oil is not reomended for below 40* F. Quote
GrMeyer Posted February 9, 2010 Report Posted February 9, 2010 X-2 on cold weather rejetting. Also your oil could be settleing out of your gas mix, shake your 'shee back& forth to mix fuel. Bean oil is not reomended for below 40* F. +1 Quote
Burt Reynolds Posted February 11, 2010 Report Posted February 11, 2010 run a single 33mm carb,and when its above 50 degrees i run 155 main,40 pilot,air screw out 1 1/2---if it drops below 50 i run a 165 main,42 pilot,and air screw the same Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.