Overboost Posted January 31, 2010 Report Posted January 31, 2010 (edited) well, I have purchased a newer bike and will be parting out my 87 since I cannot figure out whats wrong with the engine...heres a PARTIAL list being I know more will come up once I start taking it apart. roller chassis- $400 unported jugs- $250 pair lower engine, has chain whack-$300 stock clutch unit-$100 stock carbs-$120 stock reeds-$30 white or black plastics-$100 each, pickup only gas tank a valve-$30 engine runs absolutely perfect, just smokes from left side bad around 6500 R's and looses power, cant figure it out, idles and drives around excellent, just dont get on it hard (yea right) prices dont include the ride, pickup is free ofcourse. will post a couple pix of the bike and some parts as they come off, will start taking it apart in the next day or 2 lower engine will be everything except the clutch, flywheel, stator and clutch cover, runs, but smokes, no holes in pistons and drove it as is for over a year, until the above mentioned problem last fall offers accepted as long as fair...jugs and roller are firm Edited January 31, 2010 by Overboost Quote
makemefaster Posted January 31, 2010 Report Posted January 31, 2010 i need a stater and fly wheel assembly (every thing) how much? Quote
Overboost Posted January 31, 2010 Author Report Posted January 31, 2010 i need a stater and fly wheel assembly (every thing) how much? the stator has a wire that was repaired (by me) because the flywheel had rubbed a hole in the coating, still works fine..I can dig up a stator plate...only have a stocker avalible, the adj, is going on the new bike... $75 + ride for the setup (basicly for just the flywheel price) Quote
Overboost Posted February 2, 2010 Author Report Posted February 2, 2010 (edited) lights are sold pending payment and inspection.... make an offer, this is an entire, untouched bike... just now taking it apart, everything is avalible excpet pipes, clutch, reeds, head and tires/wheels everything else is there. durablue axle, swing arm, J-arm setup, frame, engine, you name it, it is complete as I type, dont know about tomorrow, selling things local so it is not lasting long. make offer, let me know what you want, everything is negotiable. PM or email, [email protected] Edited February 2, 2010 by Overboost Quote
FMF shee 98 Posted February 19, 2010 Report Posted February 19, 2010 the stator has a wire that was repaired (by me) because the flywheel had rubbed a hole in the coating, still works fine..I can dig up a stator plate...only have a stocker avalible, the adj, is going on the new bike... $75 + ride for the setup (basicly for just the flywheel price) do u still have the flywheel and stator? Quote
lowspikedrop Posted February 19, 2010 Report Posted February 19, 2010 how much for a complete motor? everything to bolt in and go? picture please Quote
JCMshee Posted February 19, 2010 Report Posted February 19, 2010 Do you have a coil, kill switch and key assembly? How much for all three of them? Quote
BANSHEEAHOLIC Posted February 19, 2010 Report Posted February 19, 2010 Do you have the clutch cable mounting bracket that holdsdown the clutch cable to the engine block? Also I need the mounting bolts to mount the rear caliper to the rotor! Quote
wizeass2005 Posted February 22, 2010 Report Posted February 22, 2010 Front shocks? shoot me a pm. thanks Quote
trademark Posted February 23, 2010 Report Posted February 23, 2010 needing front cabs, price?paypal info Quote
Overboost Posted February 25, 2010 Author Report Posted February 25, 2010 needing front cabs, price?paypal info what is a front cab? Quote
trademark Posted February 26, 2010 Report Posted February 26, 2010 was front brakes sorry , got some now Quote
dunner250 Posted February 26, 2010 Report Posted February 26, 2010 need exhaust pipe hangers and springs if in good shape. How much shipped to 98229? Quote
shoopie Posted March 11, 2010 Report Posted March 11, 2010 still have the rolling chassis? very interested...pm sent Quote
FP3 Posted March 11, 2010 Report Posted March 11, 2010 how much for the front brake master cyclinder and clutch lever/mount? thanks pat Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.