BigMatt Posted January 25, 2010 Report Posted January 25, 2010 I bought some v-force reeds & cages along with a spacer, Do I have to re-jett now? thanks, Matt Quote
Fullthrottle02 Posted January 25, 2010 Report Posted January 25, 2010 Not to say that you'll have to re-jet, but you will need check. Quote
AKheathen Posted January 26, 2010 Report Posted January 26, 2010 x2. depending on what reeds you had before, you may end up a tad rich. since you are going to put spacers on, i would suggest using plug chops to check the mains. there may be a topend breakup that can sound rich, or spark problem. if that happens, then move the spacers to the carb side of the reeds... Quote
BigMatt Posted January 26, 2010 Author Report Posted January 26, 2010 x2. depending on what reeds you had before, you may end up a tad rich. since you are going to put spacers on, i would suggest using plug chops to check the mains. there may be a topend breakup that can sound rich, or spark problem. if that happens, then move the spacers to the carb side of the reeds... should i just start off by putting the spacer on the carb side, I have stock reeds in now but I do have some porting work, I bought the bike 2 months ago so I wanna tear into it and check it all out this is my first banshee as a kid I always dreamed of one, now do spacers really work? there cheap so I just picked one up! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.