PRICE FOR BANSHEE

[gotnos]

vito's bigboar kit

air shocks,

chrome A- arms,

38mm carbs,

4MM LONG ROD STROKER CRANK

but needs cyclinder redone what would you guys pay for it

[SAVAGE420]

vito's bigboar kit

air shocks,

chrome A- arms,

38mm carbs,

4MM LONG ROD STROKER CRANK

but needs cyclinder redone what would you guys pay for it

 

Lets see some pics. Where are you located. Location plays a big roll on price. How bad are the cyl walls? Did both pistons let go? Any damage to the crank? Or pieces floating around down there?

Need quite a bit more info man....Pics are a must.

[gotnos]

in the nc area he says the nickel seal messed up in cylindars

[2K1Banshee350]

in the nc area he says the nickel seal messed up in cylindars

 

well if it has a bigBOAR kit, then its very rare and id give him whatever it took.... its too bad about the cylinDARS though

[WantABanshee]

the year of the bike plays a huge importance. That might be nice to know

[LiftdT4R]

the year of the bike plays a huge importance. That might be nice to know

 

Ehh somewhat, the j-arm bikes typically go for a little less, but I would pay the same amount for a 92 that's in the same shape as an 02.

 

As long as the bike is in decent shape, I would say 2k, TOPS. If the cylinders can be rebored, and just need pistons and rings, you can get away for about $300 or less if you do the labor yourself. If the cylinders are busted or on the last bore your looking at a bit more. If you had a pic or more info somebody could definately give you a closer price.