mudkickin4x4 Posted January 3, 2010 Report Share Posted January 3, 2010 i have been trying to get my timing right for a month now and cant get it, my friend who works at a small engine shop is having trouble with it also.........is there any info that might help me Quote Link to comment Share on other sites More sharing options...
AKheathen Posted January 3, 2010 Report Share Posted January 3, 2010 well, what are you looking to do, and what is the setup? timing plate or dyna ignition? pipes, reeds, carbs, porting compressoin (domes and bore) ridding, etc..... Quote Link to comment Share on other sites More sharing options...
mudkickin4x4 Posted January 3, 2010 Author Report Share Posted January 3, 2010 my stator just went bad and i replaced it and cant get the timing right Quote Link to comment Share on other sites More sharing options...
Screaming Yellow Zonker Posted January 3, 2010 Report Share Posted January 3, 2010 did you put the key back in the flywheel??? Did you adjust the pick up? 1/2 mm or .020 in Quote Link to comment Share on other sites More sharing options...
mudkickin4x4 Posted January 3, 2010 Author Report Share Posted January 3, 2010 yea the key is in there, i didnt adjust the pick up, my buddy might have tho... i will see if he has tried that yet Quote Link to comment Share on other sites More sharing options...
AKheathen Posted January 3, 2010 Report Share Posted January 3, 2010 after you check the pickup gap is set, make sure all the wiring is good, no melting on the exhaust, or bad grounds. test the coil and plug caps. did you buy a ricky stator? did you use the banshee flywheel puller to remove the flywheel? Quote Link to comment Share on other sites More sharing options...
mudkickin4x4 Posted January 3, 2010 Author Report Share Posted January 3, 2010 no i used a puller, and all the other eletrical parts check out fine Quote Link to comment Share on other sites More sharing options...
AtvFoxBoy86 Posted January 3, 2010 Report Share Posted January 3, 2010 What exactly is the problem your having? Alls you told up is that you been trying to get it right. Quote Link to comment Share on other sites More sharing options...
Drewski Posted January 3, 2010 Report Share Posted January 3, 2010 no i used a puller, and all the other eletrical parts check out fine I hope you didn't bend your flywheel! Quote Link to comment Share on other sites More sharing options...
mudkickin4x4 Posted January 3, 2010 Author Report Share Posted January 3, 2010 how can i figure out if i bent it, its looks fine Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.