00sheerzr Posted November 10, 2009 Report Posted November 10, 2009 hi i just got my banshee a few weeks ago and i was told to run 32 to 1 i use castor 927 and i dont see any smoke after its warmed up and it smeels real good im worryd because i dont see smoke out of the exhaust , is that bad? Quote
BigRed350x Posted November 10, 2009 Report Posted November 10, 2009 hi i just got my banshee a few weeks ago and i was told to run 32 to 1 i use castor 927 and i dont see any smoke after its warmed up and it smeels real good im worryd because i dont see smoke out of the exhaust , is that bad? Its normal not to see smoke once the bike is warmed up. As long as you are mixing your gas and its not really cold (castor tends to seperate in cold temps) then you are fine. If it is cold, just shake your gas real well before topping off. Make sure the oil is mixed with the gas real well before you pour it in your tank. Also, if it is cold where you ride, shake your bike a lot before you start up for the first time in the cold, because the oil can seperate and sink to the bottom of your tank. Castor 927 is good oil. I run it in all my 2-strokes. If you are on gas your ratio is pretty good. Quote
shee4speed Posted November 10, 2009 Report Posted November 10, 2009 I run the same.32:1.Smoke pretty much dissapears when shes warm. If your are running way rich you'll see alot of smoke all the time. Hey BigRed,what do you consider cold? Quote
AKheathen Posted November 10, 2009 Report Posted November 10, 2009 in the 30's. it can separate with different fuels, too. this is why i chose not to run it. Quote
shee4speed Posted November 10, 2009 Report Posted November 10, 2009 in the 30's. it can separate with different fuels, too. this is why i chose not to run it. ahhhh,it doesn't get that cold around here. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.