blackedout96 Posted October 16, 2009 Report Posted October 16, 2009 (edited) Bike ran perfect and is EXTREMELY clean... Motor is a fresh .30 over bore stock stroke/stock port with hot rods crank, wiseco pistons and Pro-Design Cool Head. Ran long enough to tune and break-in, that's it. Bike is still fully assembled for the most part, but will be coming apart in the next few days. I will ship everything but the Frame, Tires, Motor and Plastics - Located in Southwest Michigan. Will get pics up tonight! Let me know what you need.... Paypal: [email protected] All Prices Are + Shipping Motor-complete $1,000 (If this doesn't sell quick I will part it) MSD Ignition(complete) $200 Stock Carbs, TORS removed w/ throttle cable and K&N pods $100 Complete J arm front end- arms, shocks, spindles, tie rods and hardware $325 Rear Shock $65 Swingarm(stock) $40 axle-straight with nuts and hubs(stock) $80 Stock Carrier-good bearings $50 Rear Caliper $45 Front Calipers $75 Rear Rotor and Hub $20 Sprocket and Hub $20 Seat- all black w/ newer cover $50 Plastics- Red with ceet graphics $125 Frame- very clean with factory silver finish $150 Also Look Here! EBAY Auctions If there is anything you need but don't see, please pm me and I'll get you pics and a price. Thanks For Looking!! Edited October 16, 2009 by blackedout96 Quote
kubitza123 Posted October 16, 2009 Report Posted October 16, 2009 Pics of MSD to [email protected] thanks Quote
kubitza123 Posted October 16, 2009 Report Posted October 16, 2009 I'm probably going to buy the ignition just call me or e-mail me your phone # i have some questions etc. Tried PM you but i guess your mailbox is full? Quote
Velislide Posted October 19, 2009 Report Posted October 19, 2009 How much for the plastics shipped to 56649, International Falls, MN? Quote
blackedout96 Posted October 25, 2009 Author Report Posted October 25, 2009 Leaving the bottom end together... Basically new stock stroke Hot Rods crank, great trans, clutch, stator, everything is perfect. Only flaw you might find is the flywheel. Looks bad, but runs great! Great lower assembly. Any questions please feel free to contact me any time!!!! Quote
Larry's Shee Posted October 25, 2009 Report Posted October 25, 2009 What would you take for just upper&lower arms? Ball joints must be good. Where in Mi are you? can pm me on answer on location, Would do personal p-up if close enough, I'm tween Pontiac/ Flint. Quote
blackedout96 Posted October 25, 2009 Author Report Posted October 25, 2009 What would you take for just upper&lower arms? Ball joints must be good. Where in Mi are you? can pm me on answer on location, Would do personal p-up if close enough, I'm tween Pontiac/ Flint. I think I'm going to leave the chassis together and just sell it ad a roller. If anything changes ill let you know Quote
Larry's Shee Posted October 26, 2009 Report Posted October 26, 2009 I think I'm going to leave the chassis together and just sell it ad a roller. If anything changes ill let you know What do you think you would want for roller? Quote
Larry's Shee Posted October 26, 2009 Report Posted October 26, 2009 I think I'm going to leave the chassis together and just sell it ad a roller. If anything changes ill let you know What do you think you would want for roller? Quote
Larry's Shee Posted October 26, 2009 Report Posted October 26, 2009 I think I'm going to leave the chassis together and just sell it ad a roller. If anything changes ill let you know What do you think you would want for roller? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.