NickisGod Posted July 25, 2009 Report Posted July 25, 2009 does any one else own one? i do but can seem to get it bled... any ideas why? Quote
SAVAGE420 Posted July 25, 2009 Report Posted July 25, 2009 Keep pumping like you do with brakes. Just when the bleeder is closed pump it 5 times instead of one time...will take a bit anyways. Also at the beginning if its bone dry fill the rez and open the bledder and stick a hose on the end into a cup(so there is no mess) and let gravity help fill the line...takes about an hour or more this way AND then bleed it like i said above..it really helps alot and then its much easier to get bled. Quote
Snopczynski Posted July 25, 2009 Report Posted July 25, 2009 It takes the factory special bleeding tools and an act of god to bleed one. Quote
Thack82 Posted February 10, 2011 Report Posted February 10, 2011 sick, ill give it a go I just installed a Hydraulic Clutch on my Banshee last night. I haven't got to ride it with the new set up on there, but from what I've seen already I think I'm going to love it. I have a Drive Line Heavy Duty Clutch (with YZF 1000 Components) and a Barnett Dirt Digger Basket. I put the Drive line clutch in it because the Barnett didn't hold up worth a shit. I loved the HD Drive-Line Clutch but the pull was so stiff. So I tried a EZ Pull Lever by MSR, it felt more responsive but it didn't help the pull I ended up buying the Billetanium Hydraulic Clutch set up. I bled mine with a syringe/needle. I installed it then I took the top line loose and used the need and syringe to fill it. After it was full I hooked it up and started pumping it and bled it out just like you would the brakes. I can't wait to get out in the woods and try it out. Quote
jbooker82 Posted February 11, 2011 Report Posted February 11, 2011 Another thing to try is to fill it from the master cylinder up. Get a sringe and a pice of hose. Put it on the master cylinder opean the bleed valve and force the fuid up in to the resivour. Air tries to go up so if you fill from the bottom up it will help it along. Quote
Coupelx Posted February 11, 2011 Report Posted February 11, 2011 just let gravity do its thing. keep the res full. i do front brakes this way all the time. Quote
Thack82 Posted February 16, 2011 Report Posted February 16, 2011 I just got mine Hydraulic Clutch on, and man is it nice. It might be one of the best mods I've done to my Banshee so far. I'm running a Drive-Line Heavy Duty Clutch and a Barnett Dirt Digger Basket. The clutch has held everything I've put to it and its great, the only down side to the Drive-Line HD Clutch was the pull. It was pretty stiff, and with me running 15/42 gearing in the woods it was hell on my hand. The Hydraulic Clutch made a huge difference. I did have a little trouble bleeding it, I ended up buying a Bleeder and Pump from Auto Zone and that took care of the problem. Quote
pabansheematt Posted February 16, 2011 Report Posted February 16, 2011 does any one else own one? i do but can seem to get it bled... any ideas why? There a bitch to bleed. Keep at it. Once your done you'll love it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.