400cc 24-1

[topo]

i just bought a 2001 banshee and the person told me that it was bored out to 400cc. And that the oil to gas mixture should be 24 to 1 but all the post i have read say 32 to 1. which one is correct and is using 24 to 1 safe.

thank you

[AKheathen]

24:1 is the mixture for a stock setup with stock jetting. it uses so little fuel that it needs the extra oil. 32:1 and up to 100:1 is for bikes running the good oils and large jetting sizes.

 

[topo]

24:1 is the mixture for a stock setup with stock jetting. it uses so little fuel that it needs the extra oil. 32:1 and up to 100:1 is for bikes running the good oils and large jetting sizes.

so 24:1 is a safe mix. The banshee has been jetted and reeds changed so i could move to 32:1?? I'm using 91 octane and amsoil.

 

[AKheathen]

well shit. looks like you have pipes too. bet it smokes alot. you're running good oil, have the mods and jetting, so you can go 32:1 or 40:1depending, then verify your main size is right with a proper plug chop. running less oil will give you more fuel. you can find how to do a proper plug chop by searching in the jetting section.

[RZBansheeMan]

That looks like the Banshee that dipshit kid " xXBANSHEE_KILLAXx " just sold a couple days ago....... :yelrotflmao: :yelrotflmao: :yelrotflmao: :yelrotflmao: :yelrotflmao: :yelrotflmao:

[topo]

thanks for the info.