What Jetting should I use

[Doddy]

I just bought some VF2 reeds and was wondering what I should change my jetting to if at all.

 

I'm currently running a 310 main, 25 pilot, w/ the needle on the 3rd clip, and the air screw out 1/2 turn

 

Mods:

FMF Fattys w/ Power Core II

K&N Uni-filter w/ Proflow adapter and lid removed

TORS eliminator

Elevation - Sea Level

Temp - 70-90

 

Now I know that 310 seems pretty high for the main jet, but it runs great right now. Should I even change it at all?

 

Thanks for any help.

 

 

 

[Doddy]

Any help is appreciated...

[GrMeyer]

are you coming from stock reeds? And if not I would prob just go up one jet and then see how it runs. If it runs bad then go down a jet and then if it runs better then you know your in the ball park

[rmkboxer]

 

 

I would not change your jetting, it shoud not change, check your plugs to be sure

Edited July 17, 2009 by rmkboxer

[pr0blumz]

You probably will have to go down a couple of sizes. 310 sounds kinda rich. Try somewhere around 280 and do a plug chop.

[official_style]

i just put vf3s on this past weekend, and im running rich now. i was running 310s, 3rd clip 27.5 pilots. i have read in a few posts on here that VF reeds cause it to run richer.