lt1bird Posted June 10, 2009 Report Posted June 10, 2009 Just wondering what a basic banshee water temp is.....Mine runs around 180 degrees.....should this be warm enough? I have a very large radiator.... Quote
SAVAGE420 Posted June 10, 2009 Report Posted June 10, 2009 Just wondering what a basic banshee water temp is.....Mine runs around 180 degrees.....should this be warm enough? I have a very large radiator.... Perfecto :thumbsup: Quote
jbooker82 Posted June 10, 2009 Report Posted June 10, 2009 Yea that is what I shoot for on my banshee. Mine runs in the 160 range in the winter. and 190-210 in the hot summer. It just depends on how I am riding. Poking along in the trails with 4 strokes cause it to warm up a little. I shut it down around 220-225. My temps are measured right at the head outlet with a digital trail tech vapor. Quote
lt1bird Posted June 10, 2009 Author Report Posted June 10, 2009 Sweet.....I have not seen mine go over 195 yet in stop and go traffic.... Thanks! Quote
yamahaman244 Posted June 10, 2009 Report Posted June 10, 2009 Sweet.....I have not seen mine go over 195 yet in stop and go traffic.... Thanks! Well mine was at 210 after the rebuild is that ok or to hot Quote
Thewhite Posted June 10, 2009 Report Posted June 10, 2009 Yea that is what I shoot for on my banshee. Mine runs in the 160 range in the winter. and 190-210 in the hot summer. It just depends on how I am riding. Poking along in the trails with 4 strokes cause it to warm up a little. I shut it down around 220-225. My temps are measured right at the head outlet with a digital trail tech vapor. Do you have a picture of the sensor installation ? The head water outlet pass between the two reed valve and you got enought space or you install it after the water pump ? Quote
sheerider1026 Posted June 11, 2009 Report Posted June 11, 2009 i am thinking that the water exits the head out the other hose.. thats what i have found.. and that where my trail tech vapor is installed Quote
jbooker82 Posted June 11, 2009 Report Posted June 11, 2009 Do you have a picture of the sensor installation ? The head water outlet pass between the two reed valve and you got enought space or you install it after the water pump ? No it is installed on the other side of the head (front). Coolant is pumped from the bottom of the radiator, through the pump, up the hose inbetween the intakes, through the head, and then to the top of the radiator. It is just one of those billit aluminum adaptors that has an electric probe installed. I use a trail tech vapor. josh Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.