smkmupbanshee Posted May 18, 2009 Report Posted May 18, 2009 I have a fresh 4mm duner motor for sale. Has about 6-8 hours on it. Mild dune port .20 over Chariot Cool Head Custom cut noss domes 4mm crank, trued and welded Lightened flywheel Wiesco Pistons Billet pro design water pump Billet pro design ex drain Billet dipstick 1-5 duneable override billet clutch basket 1 dir racing reeds Billet pro design timing plate Pancake bearing for clutch Cases are pefect, no breaks All new seals and gaskets, ready to run! 2k obo, would be interested in a bone stock motor and cash. Black Powder coated(from cpi) cpi sb inframes with 6-8 hours, mint shape, no damage. Couple of rubs on silencers where my sparkys were attached but thats it. $400 obo 28mm Pwk Keihn carbs $175 obo Quote
banshee_terror_ Posted May 18, 2009 Report Posted May 18, 2009 i have a mild dune port and 20 over cyl's and thats it i have a coolhead on there now but i can give you the stock head if u want and it has a brand new topend never even test fired everything was went over durring the rebuild Quote
octane82 Posted May 19, 2009 Report Posted May 19, 2009 how are the carbs good working shape. pm sent with offer callin dibs if in good sahpe. and would like some pics if possible thanks. Quote
smkmupbanshee Posted May 19, 2009 Author Report Posted May 19, 2009 Carbs are sold pending payment. I'm looking for a completely stock motor, no port work. May start pieceing the motor next week if I cant find a deal or sell it whole. Thanks Quote
octane82 Posted May 19, 2009 Report Posted May 19, 2009 Carbs are sold pending payment. I'm looking for a completely stock motor, no port work. May start pieceing the motor next week if I cant find a deal or sell it whole. Thanks 160 for the carbs shipped. Quote
smkmupbanshee Posted May 19, 2009 Author Report Posted May 19, 2009 Would also be interested in trading the cpis for some t6's or pro circuits with sparkys and cash. Quote
SD1026 Posted May 19, 2009 Report Posted May 19, 2009 What's the details on the crank????? If u endup peicing it out. Quote
smkmupbanshee Posted May 19, 2009 Author Report Posted May 19, 2009 What's the details on the crank????? If u endup peicing it out. The crank is a vitos and has been trued and welded(both sides of the pins). Has new seals I would include also. Quote
SD1026 Posted May 19, 2009 Report Posted May 19, 2009 The crank is a vitos and has been trued and welded(both sides of the pins). Has new seals I would include also./ is it a 4 mil stroker 115mm rod??? if so i got dibbs what type of berrings? Quote
streetbikebanshee Posted May 20, 2009 Report Posted May 20, 2009 hey would u trade a stock shee motor for your motor? Quote
Darthwall Posted May 20, 2009 Report Posted May 20, 2009 / is it a 4 mil stroker 115mm rod??? if so i got dibbs what type of berrings? vito's cranks have stock length rods on them for some reason so rods more than likely are 110 no big deal just use standard banshee pistons with the 4mil domes Quote
smkmupbanshee Posted May 20, 2009 Author Report Posted May 20, 2009 hey would u trade a stock shee motor for your motor? Yes with some cash. vito's cranks have stock length rods on them for some reason so rods more than likely are 110 no big deal just use standard banshee pistons with the 4mil domes Correct, thank you. Quote
smkmupbanshee Posted May 20, 2009 Author Report Posted May 20, 2009 Carbs are sold. Motor is pending a sale. CPI's still for sale. Quote
stroking Posted June 10, 2009 Report Posted June 10, 2009 1-5 duneable override do you still have the tranny for sale?? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.