88-04banshee Posted May 1, 2009 Report Posted May 1, 2009 I have an extra set of arms from a raptor 700-these are the same as the yfz450 arms. the ball joints feel good however the threads are a little beat up from the original owner hitting the nut to get them off the spindles so it kind of chewed up the threads but should be able to be re-threaded and used, there is also a couple good dents on the bottom (bottom painted black)side but are not bent and usable. condition reflects the price and buyer needs to know these will be usable with a little work. $80 plus shipping Quote
88-04banshee Posted May 2, 2009 Author Report Posted May 2, 2009 got a close up pic of the threads? This is about the best picture my camera will take, they all are about the same it's just the top 3-4 threads on all four but from the center of hole for the cotter pin down they all appear to be good. Thanks Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.