Carbs, grabbars, wheels/tires and more

[98_shee]

I have a few parts I don't need. I have Stock carbs with idle screws installed and a new braided throttle that should be in next week sometime, stock intakes, reeds, reed spacers, K&N pods with outerwears, 2 polished boost bottles they have some rub marks from the gas line, 2 polished grabbars one is a prm not sure what the other is they both had some road rash in them i sanded it out the best i could, I also have a set of stock wheels and tires the rears have razr's them they don't have much tread left. I have lots of other stock parts head, crank, tie rods, hubs, im sure theres more if you need somthing just ask and i'll see if i have it.

 

 

I need studs for a pro design head, K&N pods and outerwears for 28mm pwk's, billet pipe clamps and hangers, about anything billet and any performance parts let me know what you have.

 

Pic's

[98_shee]

More pics

[98_shee]

I also need 2 flywheels.

[98_shee]

I also have a bumper that looks to be home made it came on a bike i bought. A stock clutch cover, and a trinity head, and all hardware needed to install it, 3 oring sets 2 of them are new never opened, 4 sets of domes

 

Domes=

66.5

20cc

12 deg

 

66.5

18cc

13 deg

 

66.5

15cc

12 deg

 

66

18cc custom cut to a 19cc by lrd

9 deg

 

 

I need a set of 35 pwk's too. Everything is going on ebay tomorrow night.

 

Pics

 

 

[98_shee]

Bump!!!!! Someone needs this stuff, its going on ebay soon!! I have a set of lazer star lights i don't need if anyone is interested i can post pics.

[NOS_350x]

Lets get some prices on the curved rear grabbar, crank, Cool head with 18-20cc (just one set) domes.

[supersider]

Bump!!!!! Someone needs this stuff, its going on ebay soon!! I have a set of lazer star lights i don't need if anyone is interested i can post pics.

what do you want for the head and domes?

[98_shee]

Head is gone. Pm sent NOS_350x.

[Building my First]

I have a nice grab bar for the filters. I will get a pic up tomorrow.