Jump to content

Survey about your needle setting


SonOfSand

Recommended Posts

Hello everyone, I am trying to get my needle dialed in. My banshee will only be run at Saint Anthony (5000ft), temps are in the 50's, with the mods below, do you think running the the fourth from the top would be to rich? The bike came with the clip in the 2nd spot, and was defiantly lean. The mains are set at 280 and the bike runs fine up top. Any input or advice is greatly appreciated.

Link to comment
Share on other sites

Hello everyone, I am trying to get my needle dialed in. My banshee will only be run at Saint Anthony (5000ft), temps are in the 50's, with the mods below, do you think running the the fourth from the top would be to rich? The bike came with the clip in the 2nd spot, and was defiantly lean. The mains are set at 280 and the bike runs fine up top. Any input or advice is greatly appreciated.

 

 

Never know till you try it, not going to hurt anything, thats where mine runs the best.

Link to comment
Share on other sites

The needle is the transition between 1/4 and WFO throttle.

You can just set it where it feels best.

If you want to be sure you can read the plugs for any throttle position

you want. You just have to run it at the same throttle position the whole

time.

Check this out click here

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...