SonOfSand Posted March 20, 2009 Report Posted March 20, 2009 Hello everyone, I am trying to get my needle dialed in. My banshee will only be run at Saint Anthony (5000ft), temps are in the 50's, with the mods below, do you think running the the fourth from the top would be to rich? The bike came with the clip in the 2nd spot, and was defiantly lean. The mains are set at 280 and the bike runs fine up top. Any input or advice is greatly appreciated. Quote
dragbanshee Posted March 20, 2009 Report Posted March 20, 2009 Hello everyone, I am trying to get my needle dialed in. My banshee will only be run at Saint Anthony (5000ft), temps are in the 50's, with the mods below, do you think running the the fourth from the top would be to rich? The bike came with the clip in the 2nd spot, and was defiantly lean. The mains are set at 280 and the bike runs fine up top. Any input or advice is greatly appreciated. Never know till you try it, not going to hurt anything, thats where mine runs the best. Quote
SonOfSand Posted March 20, 2009 Author Report Posted March 20, 2009 Never know till you try it, not going to hurt anything, thats where mine runs the best. What is your elevation and avg temp? Do you have similar mods? Quote
dragbanshee Posted March 21, 2009 Report Posted March 21, 2009 What is your elevation and avg temp? Do you have similar mods? 650-800 ele. usually 60-85 temps Quote
brian Posted March 22, 2009 Report Posted March 22, 2009 The needle is the transition between 1/4 and WFO throttle. You can just set it where it feels best. If you want to be sure you can read the plugs for any throttle position you want. You just have to run it at the same throttle position the whole time. Check this out click here Quote
jjn56 Posted March 23, 2009 Report Posted March 23, 2009 I vote third clip, thats where most people run Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.