quikshee Posted March 15, 2009 Report Posted March 15, 2009 When I pulled the motor on my banshee, I forgot to put new seals in. So for piece of mind I pulled it again and replaced the crank seals, I dropped it back in and got it running. I made it about 2 passes around the house when a chattering noise started comin from the engine so i killed it before causing anymore damage, it ran awesome until I shut it down. I noticed when I very slowly kick it over, it makes that clicking sound. I pulled the clutch cover off and couldn't visibly see anything wrong or damaged. All I did was pull off the bottom end and replace the crank seals, what the hell could I have done? Quote
tony cub Posted March 15, 2009 Report Posted March 15, 2009 its hard to say..best bet is to remove motor and check everything again... Quote
locogato11283 Posted March 15, 2009 Report Posted March 15, 2009 check the kicker area. look over the idler gear. make sure its not hitting on anything and that your clip is still on. make sure your kicker gear is in there right or it could come out and not go back all the way once the bike is running. Quote
quikshee Posted March 15, 2009 Author Report Posted March 15, 2009 I figured that's what I was gonna have to do :wallbash: , but I was just curious to see if by chance anyone had this sorta thing happen to them. Quote
locogato11283 Posted March 15, 2009 Report Posted March 15, 2009 pull your clutch cover off. its more than likely in that area. Quote
quikshee Posted March 15, 2009 Author Report Posted March 15, 2009 check the kicker area. look over the idler gear. make sure its not hitting on anything and that your clip is still on. make sure your kicker gear is in there right or it could come out and not go back all the way once the bike is running. I'll have to pull the cover and look real good again, I recall the clip still being on. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.