banshee_terror_ Posted March 10, 2009 Report Posted March 10, 2009 It has proble been covered in the past but I was looking and didn't find what I wanted. Any way im looking for a way to remove rust from my pipe. The whole thing but the sparky is rusted and I wana know is there a way to remove the rust without getting it blasted or sanding it. Im thinking of a liqued or something like paint striper. Do they make something for that Quote
peterlocal22 Posted March 10, 2009 Report Posted March 10, 2009 never tried this but its made by a well konw company, http://www.totalmotorcycle.com/reviews/Tur...moverReview.htm Quote
Screaming Yellow Zonker Posted March 10, 2009 Report Posted March 10, 2009 navel jelly. Never dull. mineral spirits. what ever you use you will work your arm until it is ready to fall off. I tried this then just took them to have them blasted and powder coated. Quote
banshee_terror_ Posted March 10, 2009 Author Report Posted March 10, 2009 dam no geniouse has figured out a salooshine yet dam. but ill give a few of them a try. i tried sanding but it took way to long to get a 3x3 area done Quote
Woody 350 Posted March 10, 2009 Report Posted March 10, 2009 never tried this but its made by a well konw company,http://www.totalmotorcycle.com/reviews/Tur...moverReview.htm I've got the same problem, just not real bad. I'm going to try some CLR I have under the sink and see how that will work Quote
MikeNick Posted March 10, 2009 Report Posted March 10, 2009 I've never tried this stuff man but it's worth a shot I suppose.. http://www.eastwoodco.com/jump.jsp?itemID=...temType=PRODUCT Quote
banshee_terror_ Posted March 11, 2009 Author Report Posted March 11, 2009 I've never tried this stuff man but it's worth a shot I suppose.. http://www.eastwoodco.com/jump.jsp?itemID=...temType=PRODUCT I like the sound of this one but what's clr Quote
sheeman09 Posted March 11, 2009 Report Posted March 11, 2009 i would try using a brillo pad and some soapy water... just go over it and it should take the rust off depending on the texture of the base metal... Quote
Woody 350 Posted March 11, 2009 Report Posted March 11, 2009 CLR works wonders. How long do you let it soak? Do you use it straight, or dilute it? Quote
Woody 350 Posted March 11, 2009 Report Posted March 11, 2009 I like the sound of this one but what's clr Calcium, Lime, Rust remover. You will find it at WalMart ect. by the shower cleaner Quote
banshee_terror_ Posted March 11, 2009 Author Report Posted March 11, 2009 Calcium, Lime, Rust remover. You will find it at WalMart ect. by the shower cleaner im gana try that one. and for the dude that put up the pick did you scrub it or let it soak? Quote
TwistedSheeRida Posted March 11, 2009 Report Posted March 11, 2009 actually in the process of doing mine right now. Im using a grey scotch bright pad to do mine and so far it is working great my pipes were pretty well rusted i'll post some pics up when im done. Quick question i was thinking of trying that CLR but not sure if it will be too strong for the chrome on the pipes anyone do it to there pipes? Quote
The Faster Cracker Posted March 12, 2009 Report Posted March 12, 2009 Get you a bottle of "Colonel Brassy" and a can of "Major Shine". Colonel Brassy and Major Shine. It took off the surface rust and most of the pitting, Colonel Brassy that is, and the Shine, well put a damn good shine on it. And its like 30bucks for both. or at least thats what we sell it for. Shit is so good that you dont hae to even use a rag to get the rust off. It will come off jsut using your finger and you dont have to have elbow grease to do it either. I had mine done in 20 minutes, both pipes! Shoot me a pm if you want and ill give wou some before and after pics. i can ship to if you want to but some Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.