gaetzbomb Posted February 23, 2009 Report Posted February 23, 2009 ok i need help jetting. picked up a set of stock carbs to replace a junk single carb setup i got on my bike when i got it. it has fmf gold series fattys with silincers on it, stock air box with lid removed and a k&n filter, other than that basically stock. the carbs have tors removed also. if you guys could help it would be very appreciated. Quote
gaetzbomb Posted February 23, 2009 Author Report Posted February 23, 2009 forgot that sry about that elevation is 1,098 ft Quote
gaetzbomb Posted February 24, 2009 Author Report Posted February 24, 2009 alrite no one wants to help ok then Quote
GrMeyer Posted February 24, 2009 Report Posted February 24, 2009 alrite no one wants to help ok then im in Phx and have 300's but with pods so i would start around 320-310 and work your way down Quote
AKheathen Posted February 24, 2009 Report Posted February 24, 2009 310's at 20 degrees, sea level, 30 pilot Quote
Rodneya Posted February 24, 2009 Report Posted February 24, 2009 I have a similar setup at almost the same elevation and run 300 mains and 27,5 pilots. Try 310 mains to start and work from there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.