Ieat4strokes Posted February 7, 2009 Report Posted February 7, 2009 Got my chromed acorn style head nuts today from cascade and was gonna swap out the stock nuts, damn studs are too long and the acorn nuts are not deep enough, could i just add washers? really dont wanna take it all apart again to try to screw studs in farther. Thanks Quote
tony cub Posted February 7, 2009 Report Posted February 7, 2009 Got my chromed acorn style head nuts today from cascade and was gonna swap out the stock nuts, damn studs are too long and the acorn nuts are not deep enough, could i just add washers? really dont wanna take it all apart again to try to screw studs in farther. Thanks you can..i would use some kind of copper or aluminum washer..(i hope i spelled that right)..lol Quote
mofoka Posted February 7, 2009 Report Posted February 7, 2009 How big are your nuts? Chariot Performance sent me their head with some taller acorns. I'd rather run either thicker washers or taller acorns. Less chance for a leak. Quote
Ieat4strokes Posted February 7, 2009 Author Report Posted February 7, 2009 well i actually thought that my nuts where sized correctly and in this case it proved me wrong hahhah im just gonna add a couple stainless lock washers to em and see what happens....the orings in between the head and studs should stop any leaks from happening right? Quote
swrbansheeboy Posted February 7, 2009 Report Posted February 7, 2009 i thought the cascade nuts were designed to work with the stock studs, sounds like you have the longer pro design studs? will the flanges on the cascades even seat into the top plate on the pro design head? i've never tried it... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.