motoxer828 Posted February 3, 2009 Report Posted February 3, 2009 Im new to this banshee forum, i just had a few performance questions, i currently traded for a 2003 banshee, bored .10 over, coolhead, T5 pipes, no airbox with k&n filters, im not sure wat jets im running, or the domes in the heads. i am planning on doing a rebuiled in the future .50 over and a drag port, i am planning on using this bike for drag racing, My question is what carbs do i need to get, and what reed should i put in it, and what other mods should i do to it, i would like to all the littlier stuff right now then do the rebuild over the summer when i have more cash. thanks for the help Quote
shee4speed Posted February 3, 2009 Report Posted February 3, 2009 welcome.Looks like you have some nice boltons now. Are the stock carbs still on there? When you get ported the builder will tell you what size to get. Quote
motoxer828 Posted February 3, 2009 Author Report Posted February 3, 2009 i am pretty sure the carbs are stock, someone said the stockers only have one choke for both carbs, but mine have two seperate chokes on them, not real sure if thats any help just thought i would throw it out there, who is a good builder and what am i going to spend on a good port, bore and piston kit?? Quote
05.Banshee.SE Posted February 3, 2009 Report Posted February 3, 2009 i am pretty sure the carbs are stock, someone said the stockers only have one choke for both carbs, but mine have two seperate chokes on them, not real sure if thats any help just thought i would throw it out there, who is a good builder and what am i going to spend on a good port, bore and piston kit?? Herr Jugs Racing or FAST (Farm And Sand Toys.) Port depends on what kind you get...anywhere from $200-$450... I believe HJR does hone/bore with pistons, circlips, all that good shit for around $300. Quote
BansheeRider87 Posted February 3, 2009 Report Posted February 3, 2009 Welcome man! Sounds like another fast shee here. Contact HERR Jugs Racing. 760-815-1316 Quote
motoxer828 Posted February 3, 2009 Author Report Posted February 3, 2009 ight thanks alot for the information, what should i go with on the reeds Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.