spinechiller Posted February 1, 2009 Report Posted February 1, 2009 changed timing plate nick stator well this cause this to happen(no spark) Quote
250Rho Posted February 1, 2009 Report Posted February 1, 2009 check all of your connections, once i went through 3 different plug wires cause i had a bad connection by the generator. Quote
AKheathen Posted February 2, 2009 Report Posted February 2, 2009 if you knicked it, might as well ohm it out first red to green wires= 13.7-20.5 ohms red/whit to green white= about 100 ohms Quote
Ieat4strokes Posted February 2, 2009 Report Posted February 2, 2009 man i just went through the same problem..... all i did was change timing plate to an advanced one..... just moving the stator made it go bad...... ran fine before.... i would start there as usually thats all u move thats electric involved when u changed plate..... also check ya pickup gap.... Quote
spinechiller Posted February 4, 2009 Author Report Posted February 4, 2009 man i just went through the same problem..... all i did was change timing plate to an advanced one..... just moving the stator made it go bad...... ran fine before.... i would start there as usually thats all u move thats electric involved when u changed plate..... also check ya pickup gap.... thanks 4 all the advice Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.